Thermal analysis calculation of dry-type transformer in PSM high voltage power supply

Xia Yuyang; Li Qing; Mao Xiaohui

doi:10.11884/HPLPB202032.190294

Volume 32 Issue 2

Dec. 2019

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2020 > 32(2): 025008

Xia Yuyang, Li Qing, Mao Xiaohui. Thermal analysis calculation of dry-type transformer in PSM high voltage power supply[J]. High Power Laser and Particle Beams, 2020, 32: 025008. doi: 10.11884/HPLPB202032.190294

Citation:

Xia Yuyang, Li Qing, Mao Xiaohui. Thermal analysis calculation of dry-type transformer in PSM high voltage power supply[J]. High Power Laser and Particle Beams, 2020, 32: 025008. doi: 10.11884/HPLPB202032.190294

Citation:

PDF( 999 KB)

Thermal analysis calculation of dry-type transformer in PSM high voltage power supply

doi: 10.11884/HPLPB202032.190294

Southwest Institute of Physics, Chengdu 610225, China

Received Date: 2019-08-12
Rev Recd Date: 2019-09-16
Publish Date: 2019-12-26

Abstract

Abstract

Multi-winding dry rectifier transformer is an important equipment for high voltage power supply in Tokamak heating system. Its excellent performance is directly related to the output quality of high voltage power supply. Carrying out research on power loss and heat dissipation of transformers, reducing the performance impact of transformers due to temperature rise, is very important to ensure the good working condition of the transformer. In this paper, the relationship between thermophysical properties and temperature is fitted by MATLAB. The convective heat transfer and thermal radiation of the transformer are analyzed and calculated by the equations. In the case of natural convection and heat radiation of the air, the temperature of the transformer cannot be controlled within a temperature range that satisfies the performance, and the temperature rise is about 200 ℃. In the case of forced air convection, the good heat dissipation of the transformer is realized, and finally the forced air cooling at a wind speed of 2 m/s is achieved, and the temperature rise of the transformer is less than 75 ℃, ensuring the good working condition of the transformer. The article further uses ANSYS to analyze the temperature field distribution of the transformer. Forced air cooling reduces the overall temperature and allows heat to be released to the surrounding atmosphere more quickly, reducing the damage of the transformer under high temperature.
- dry-type transformer,
- fitting analysis,
- forced convection,
- ANSYS,
- temperature field

FullText(HTML)

References(11)

References

[1]	孙雪静. 超高速永磁同步电机的热设计与大电流检测技术[D]. 西安: 西安电子科技大学, 2012: 43-46. Sun Xuejing. Thermal design and high current detection technology for ultra-high speed permanent magnet synchronous motor. Xi'an: Xidian University, 2012: 43-46
[2]	庞营. 变压器发热与散热的数学研究[J]. 超星, 2014, 1(1):53-54. (Pang Ying. Mathematical study on heating and heat dissipation of transformers[J]. Superstar, 2014, 1(1): 53-54
[3]	张鲁, 李永光, 高向宗, 等. 变压器冷却技术的发展[J]. 能源与节能, 2016, 128(5):109-110. (Zhang Lu, Li Yongguang, Gao Xiangzong, et al. Development of transformer cooling technology[J]. Energy and Energy Conservation, 2016, 128(5): 109-110 doi: 10.3969/j.issn.2095-0802.2016.05.054
[4]	金立军. 变压器室对流换热的分析[J]. 电力建设, 2000(8):19-20. (Jin Lijun. Analysis of convective heat transfer in transformer room[J]. Electric Power Construction, 2000(8): 19-20 doi: 10.3969/j.issn.1000-7229.2000.08.007
[5]	许进峰. ANSYS Workbench 15.0完全自学一本通[M]. 北京: 电子工业出版社, 2014: 426-427. Xu Jinfeng. ANSYS Workbench 15.0 complete self-study guide. Beijing: Publishing House of Electronics Industry, 2014: 426-427
[6]	苏玎, 于学莲. 110 kV级变压器冷却方式的选择[J]. 科技风, 2015(2):11. (Su Ding, Yu Xuelian. Selection of 110 kV transformer cooling method[J]. Science and Technology, 2015(2): 11 doi: 10.3969/j.issn.1671-7341.2015.02.009
[7]	星文彤, 李志尊, 胡仁喜, 等. ANSYS13.0热力学有限元分析从入门到精通[M]. 北京: 机械工业出版社, 2011: 11-16. Xing Wentong, Li Zhizun, Hu Renxi, et al. ANSYS13.0 thermodynamic finite element analysis from entry to proficiency. Beijing: China Machine Press, 2011: 11-16
[8]	郭振华. 大型变压器绕组涡流损耗及热点温度的研究[D]. 河北: 河北工业大学, 2013: 5-8. Guo Zhenhua. Study on eddy current loss and hot spot temperature of large transformer windings. Hebei: Hebei University of Technology, 2013: 5-8
[9]	张锋. 基于ANSYS的DC/DC电源模块热分析和热设计研究[D]. 重庆: 重庆大学, 2008: 27-29. Zhang Feng. Thermal analysis and thermal design of DC/DC power module based on ANSYS. Chongqing: Chongqing University, 2008: 27-29
[10]	邢雅, 樊博, 康亚丽, 等. 树脂绝缘干式变压器内部温度场的计算[J]. 研究与设计, 2016, 40(1):34-38. (Xing Ya, Fan Bo, Kang Yali, et al. Calculation of internal temperature field of resin insulated dry type transformer[J]. Research & Design, 2016, 40(1): 34-38
[11]	谢龙汉. ANSYS FLOTRAN流体与热分析[M]. 北京: 电子工业出版社, 2012: 413-456. Xie Longhan. ANSYS FLOTRAN fluid and thermal analysis. Beijing: Publishing House of Electronics Industry, 2012: 413-456