Simulation method of quadruple-level circuit model for stack and vacuum section of Julong-I facility

Mao Chongyang; Xue Chuang; Xiao Delong; Ding Ning

doi:10.11884/HPLPB202032.190330

Volume 32 Issue 2

Dec. 2019

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2020 > 32(2): 025004

Mao Chongyang, Xue Chuang, Xiao Delong, et al. Simulation method of quadruple-level circuit model for stack and vacuum section of Julong-I facility[J]. High Power Laser and Particle Beams, 2020, 32: 025004. doi: 10.11884/HPLPB202032.190330

Citation:

Mao Chongyang, Xue Chuang, Xiao Delong, et al. Simulation method of quadruple-level circuit model for stack and vacuum section of Julong-I facility[J]. High Power Laser and Particle Beams, 2020, 32: 025004. doi: 10.11884/HPLPB202032.190330

Citation:

PDF( 782 KB)

Simulation method of quadruple-level circuit model for stack and vacuum section of Julong-I facility

doi: 10.11884/HPLPB202032.190330

Institute of Applied Physics and Computational Mathematics, Beijing 100088, China

Received Date: 2019-09-03
Rev Recd Date: 2019-10-11
Publish Date: 2019-12-26

Abstract

Abstract

The quadruple-level circuit model for stack and vacuum section of Julong-I facility was established. To avoid complicated two-dimensional circuit simulation, the prediction-correction method was used to deal with the distribution of currents at the entrance of the quadruple-level insulation stack. The accuracy and efficiency were both ensured by this method. By applying this model to the FCM-PTS code coupled with the snow-plow model for the Z-pinch load, the current for each level of the outer magnetic insulation transmission line was obtained, while the coincidence of load currents between simulation and experiment was also improved.
- Julong-I,
- insulation stack,
- magnetic insulation transmission line,
- FCM-PTS,
- circuit simulation,
- Z-pinch

FullText(HTML)

References(16)

References

[1]	Deng Jianjun, Xie Weiping, Feng Shuping, et al. From concept to reality—A review to the primary test stand and its preliminary application in high energy density physics[J]. Matter and Radiation at Extremes, 2016, 1: 48-58. doi: 10.1016/j.mre.2016.01.004
[2]	Deng Jianjun, Xie Weiping, Feng Suping, et al. Initial performance of the Primary Test Stand[J]. IEEE Trans Plasma Sci, 2013, 41(10): 2580-2583. doi: 10.1109/TPS.2013.2274154
[3]	Deng Jianjun, Shi Jinshui, Xie Weiping, et al. Overview of pulsed power research at CAEP[J]. IEEE Trans Plasma Sci, 2015, 43(8): 2760-2765. doi: 10.1109/TPS.2015.2452192
[4]	黄显宾, 任晓东, 但加坤, 等. 基于聚龙一号的钨丝阵Z箍缩内爆辐射特性[J]. 强激光与粒子束, 2016, 28:025006. (Huang Xianbin, Ren Xiaodong, Dan Jiakun, et al. Characteristics of tungsten wire array Z-pinch implosion radiation on PTS[J]. High Power Laser and Particle Beams, 2016, 28: 025006
[5]	Weseloh W N. TLCODE—A transmission line code for pulsed power design[C]//Proceedings of 7th IEEE International Pulsed Power Conference. 1989: 989-992.
[6]	Kiefer M L, Widner M M. SCREAMER—A single-line pulsed-power design tool[C]//Proceedings of 5th IEEE International Pulsed Power Conference. 1985: 685-688.
[7]	Zou Wenkang, Guo Fan, Chen Lin, et al. Full circuit calculation for electromagnetic pulse transmission in a high current facility[J]. Physical Review Special Topics—Accelerators and Beams, 2014, 17: 110401. doi: 10.1103/PhysRevSTAB.17.110401
[8]	郭帆, 王贵林, 邹文康, 等. 聚龙一号装置磁驱动加载实验的全电路模拟[J]. 强激光与粒子束, 2018, 30:125001. (Guo Fan, Wang Guilin, Zou Wenkang, et al. Full circuit calculation of magnetically driven experiment on PTS facility[J]. High Power Laser and Particle Beams, 2018, 30: 125001
[9]	薛创, 丁宁, 孙顺凯, 等. 脉冲功率驱动器与Z箍缩负载耦合的全电路数值模拟[J]. 物理学报, 2014, 63:125207. (Xue Chuang, Ding Ning, Sun Shunkai, et al. Full circuit model for coupling pulsed power driver with Z-pinch load[J]. Acta Physica Sinica, 2014, 63: 125207 doi: 10.7498/aps.63.125207
[10]	薛创, 丁宁, 张扬, 等. 聚龙一号电磁脉冲形成与传输过程的全电路模拟[J]. 强激光与粒子束, 2016, 28:015014. (Xue Chuang, Ding Ning, Zhang Yang, et al. Full circuit simulation for electromagnetic pulse forming and transmission in the PTS facility[J]. High Power Laser and Particle Beams, 2016, 28: 015014
[11]	薛创, 丁宁, 肖德龙, 等. 聚龙一号驱动Z箍缩负载内爆的简化电路模型[J]. 强激光与粒子束, 2016, 28:125004. (Xue Chuang, Ding Ning, Xiao Delong, et al. Lumped circuit model for the PTS driving Z pinch load implosion[J]. High Power Laser and Particle Beams, 2016, 28: 125004
[12]	Mao Chongyang, Sun Fengju, Xue Chuang, et al. Full-circuit simulation of next generation China Z-pinch driver CZ30[J]. IEEE Trans Plasma Sci, 2019, 47(6): 2910-2915. doi: 10.1109/TPS.2019.2911553
[13]	毛重阳, 薛创, 肖德龙, 等. 聚龙一号主开关导通时刻对负载电流的影响[J]. 强激光与粒子束, 2019, 31:015001. (Mao Chongyang, Xue Chuang, Xiao Delong, et al. Full circuit simulation for influence of the laser-triggered gas switches’ closing time on load current in PTS facility[J]. High Power Laser and Particle Beams, 2019, 31: 015001
[14]	王勐, 关永超, 宋盛义, 等. PTS装置分层真空轴向绝缘堆设计[J]. 强激光与粒子束, 2010, 22(4):777-781. (Wang Meng, Guan Yongchao, Song Shengyi, et al. Design of vacuum insulator stack[J]. High Power Laser and Particle Beams, 2010, 22(4): 777-781
[15]	Corcoran P A, Whitney B A, Bailey V L, et al. Circuit modeling techniques applied to ZR[C]//Proceedings of 17th IEEE International Pulsed Power Conference. 2009: 150-155.
[16]	Ryutov D D, Derzon M S, Matzen M K. The physics of fast Z-pinches[J]. Reviews of Modern Physics, 2000, 72(1): 167-223. doi: 10.1103/RevModPhys.72.167