[1] 辛企明, 孙雨南, 谢敬辉. 近代光学制造技术[M]. 北京: 国防工业出版社, 1997: 21-23.

Xin Qiming, Sun Yu'nan, Xie Jinhui. Modern optics manufacturing technology. Beijing: National Defense Industry Press, 1997: 21-23
[2] 周旭升. 大中型非球面计算机控制研抛工艺方法研究[D]. 长沙: 国防科学技术大学, 2007: 7-9.

Zhou Xusheng. Research on computer controlled polishing technology for large and medium aspheric surfaces. Changsha: National University of Defense Technology, 2007: 7-9
[3] Bielke A, Bechstette K, Kubler C. Fabrication of aspheric optics-process challenges arising from a wide range of customer demands and diversity of machine technologies[C]//Proc of SPIE. 2004, 5252: 1-12.
[4] Taylor J S, Sommargren G E, Sweeney D W, et al. Fabrication and testing of optics for EUV projection lithography[C]//Proc of SPIE. 1998, 3331: 580-590.
[5] 施春燕, 袁家虎, 伍凡, 等. 运动轨迹对抛光误差的影响分析和轨迹优化研究[J]. 光学学报, 2011, 31(8): 260-264. https://www.cnki.com.cn/Article/CJFDTOTAL-GXXB201108045.htm

Shi Chunyan, Yuan Jiahu, Wu Fan, et al. Analysis of polishing errors by tool paths and optimization of tool paths. Acta Optica Sinica, 2011, 31(8): 260-264 https://www.cnki.com.cn/Article/CJFDTOTAL-GXXB201108045.htm
[6] 戴一帆, 石峰, 彭小强, 等. 基于熵增原理抑制磁流变抛光中高频误差[J]. 中国科学E辑: 技术科学, 2009, 39(10): 1663-1669. https://www.cnki.com.cn/Article/CJFDTOTAL-JEXK200910007.htm

Dai Yifan, Shi Feng, Peng Xiaoqiang, et al. Restraint of mid-spatial frequency error in magnetorheological finishing (MRF) process by maximum entropy method. Science China Technological Sciences, 2009, 39(10): 1663-1669 https://www.cnki.com.cn/Article/CJFDTOTAL-JEXK200910007.htm
[7] 周林, 戴一帆, 解旭辉, 等. 离子束加工中驻留时间的求解模型及方法(英文)[J]. 纳米技术与精密工程, 2007, 5(2): 107-112. https://www.cnki.com.cn/Article/CJFDTOTAL-NMJM200702009.htm

Zhou Lin, Dai Yifan, Xie Xuhui, et al. Model and method to determine dwell time in ion beam figuring. Nanotechnol Precis Eng, 2007, 5(2): 107-112 https://www.cnki.com.cn/Article/CJFDTOTAL-NMJM200702009.htm
[8] 周林. 光学镜面离子束修形理论与工艺研究[D]. 长沙: 国防科技大学, 2008, 4: 12-14.

Zhou Lin. Study on theory and technology of ion beam modification for optical mirror. Changsha: National University of Defense Technology, 2008, 4: 12-14
[9] Dum C R, Walker D D. Pseudo-random tool paths for CNC subaperture polishing and other applications[J]. Opt Express, 2008, 16(23): 18942-18949. doi: 10.1364/OE.16.018942
[10] 张云. 光学非球面数控磁流变抛光技术的研究[D]. 北京: 清华大学, 2003, 10: 15-17.

Zhang Yun. Research on CNC magnetorheological polishing technology for optical aspheric surface. Beijing: Tsinghua University, 2003, 10: 15-17
[11] Preston F W. The theory and design of plate glass polishing machines[J]. Soc Glass Tech, 1927, 11: 214.