[1] 王华明. 高性能大型金属构件激光增材制造: 若干材料基础问题[J]. 航空学报, 2014, 35(10):2690-2698. (Wang Huaming. Materials’ fundamental issues of laser additive manufacturing for high-performance large metallic components[J]. Acta Aeronautica ET Astronautica Sinica, 2014, 35(10): 2690-2698
[2] Gu D D, Meiners W, Wissenbach K, et al. Laser additive manufacturing of metallic components: materials, processes and mechanisms[J]. International Materials Reviews, 2013, 57(3): 133-164.
[3] Roehling J D, Smith W L, Roehling T T, et al. Reducing residual stress by selective large-area diode surface heating during laser powder bed fusion additive manufacturing[J]. Additive Manufacturing, 2019, 28: 228-235. doi: 10.1016/j.addma.2019.05.009
[4] Tumbleston J R, Shirvanyants D, Ermoshkin N, et al. Continuous liquid interface production of 3D objects[J]. Science, 2015, 347(6228): 1349-1352. doi: 10.1126/science.aaa2397
[5] 胥光申, 杨根. 面曝光快速成形系统制作工艺参数的优化研究[J]. 机械科学与技术, 2015, 34(2):224-228. (Xu Guangshen, Yang Gen. Optimization of the processing parameters of mask projection stereolithography system[J]. Mechanical Science and Technology for Aerospace Engineering, 2015, 34(2): 224-228
[6] 王伊卿, 贾志洋, 赵万华, 等. 面曝光快速成形关键技术及研究现状[J]. 机械设计与研究, 2009, 25(2):96-100. (Wang Yiqing, Jia Zhiyang, Zhao Wanhua, et al. The key technology and research status of mask projection stereolithography[J]. Journal of Machine Design and Research, 2009, 25(2): 96-100
[7] 王赫, 兰红波, 钱垒, 等. 连续面曝光陶瓷3D打印[J]. 中国科学: 技术科学, 2019, 49(06):681-689. (Wang He, Lan Hongbo, Qian Lei, et al. Continuous DLP ceramic 3D printing[J]. Scientia Sinica Technologica, 2019, 49(06): 681-689 doi: 10.1360/N092018-00338
[8] Zhou Chi, Chen Yong. Additive manufacturing based on optimized mask video projection for improved accuracy and resolution[J]. Journal of Manufacturing Processes, 2012, 14(2): 107-118. doi: 10.1016/j.jmapro.2011.10.002
[9] Matthews M J, Guss G, Drachenberg D R, et al. Diode-based additive manufacturing of metals using an optically-addressable light valve[J]. Optics Express, 2017, 25(10): 11788-11800. doi: 10.1364/OE.25.011788
[10] 陈重琳. 利用液晶空间光调制器将激光整形为平顶光束的研究[D]. 武汉: 武汉理工大学, 2019: 26-27.

Chen Chonglin. Investigation on flat-top laser beam shaping using liquid crystal spatial light modulator[D]. Wuhan: Wuhan University of Technology, 2019: 26-27
[11] 张洪鑫. 相位型液晶空间光调制器特性测试方法及波前校正研究[D]. 哈尔滨: 哈尔滨工业大学, 2009: 22-26.

Zhang Hongxin. Research of the performance measurement and wavefront correction application of phase-only liquid crystal spatial light modulator[D]. Harbin: Harbin Institute of Technology, 2009: 22-26
[12] Li Jiangning, Tang Yue, KuangZheng, et al. Multi imaging-based beam shaping for ultrafast laser-material processing using spatial light modulators[J]. Optics and Lasers in Engineering, 2019, 112: 59-67. doi: 10.1016/j.optlaseng.2018.09.002