High power fiber end-cap with 6 kW output power
-
摘要: 高功率光纤端帽是kW级光纤激光器必不可少的器件，而实现光纤端帽的低损耗高强度熔接是其关键技术。由于光纤和大尺寸光纤端帽在直径上的巨大差异，二者的熔接不能通过传统熔接机实现。设计并搭建了光纤端帽熔接系统，掌握了多种尺寸的光纤端帽的熔接工艺，成功用于光纤激光器及光纤合束器的高功率输出。实验上利用单模光端帽实现了3.01 kW的激光输出，在未进行主动制冷的情况下温升为7 ℃/kW。利用多模光纤端帽实现了6.08 kW的激光输出，在未进行主动制冷的情况下温升为6 ℃/kW。Abstract: High power fiber end-cap is an essential component for kW-level fiber lasers, the key technique of which is the splicing of fiber end-caps with low loss and high tension strength. Due to the huge difference of the diameters of fiber and large-size end-cap, the splicing of them cannot be realized by traditional fusion splicers. A fiber end-cap splicing system is designed and built. The splicing art is implemented for different size end-caps with good tension strength. Output power with 3.01 kW is realized with a single-mode fiber end-cap while only heating up by 7 ℃/kW without active cooling. Output power with 6.08 kW is realized with a multi-mode fiber end-cap while only heating up by 6 ℃/kW without active cooling.
-
Key words:
- fiber laser /
- fiber splicing /
- fiber end-cap
-
点击查看大图
计量
- 文章访问数: 2227
- HTML全文浏览量: 470
- PDF下载量: 733
- 被引次数: 0
下载:
