Design of picosecond pulse source based on MOSFET and step recovery diode
-
摘要: 针对已有脉冲源无法兼顾脉冲宽度和幅值的现象,提出一种基于场效应管(MOSFET)和阶跃恢复二极管(SRD)相结合的皮秒级脉冲源设计方案。通过研究分析传统的几种脉冲源的设计方案,设计出一种百伏级的高重频皮秒级脉冲发生器,在PSPICE上对设计方案进行仿真并制作出脉冲源PCB板,实测在2 MHz的重频下产生半幅脉宽约为400 ps、幅度110 V以上的极窄脉冲,波形稳定,为高分辨的超宽带探测雷达发射机的设计提供了新的选择方案。Abstract: As the existing pulse source can not balance pulse width and amplitude, a scheme of based on field effect transistor (MOSFET) and step recovery diode (SRD) combined with picosecond pulse source was put forward. Analyzing traditional designs of several pulse sources, we designed a high repetition rate picosecond pulse generator of 100 volt level and made a design simulation with PSPICE and developed the pulse source PCB board. Measurement shows 2 MHz repetition rate, half amplitude width 400 ps around, range above 110 V and stable waveform. The scheme providedes a new selection for high resolution UWB detection radar transmitter.
-
Key words:
- step recovery diode /
- nonlinear transmission line /
- narrow pulse /
- UWB /
- MOSFET
点击查看大图
计量
- 文章访问数: 1675
- HTML全文浏览量: 400
- PDF下载量: 995
- 被引次数: 0