Design of two stage depressed collector for high-power traveling wave tube
-
摘要: 主要介绍了某X波段大功率耦合腔脉冲行波管两级降压收集极的CAD分析、结构设计及研制结果。通过使用国营第七七二厂2.5维互作用程序软件包(TWTC软件)对行波管输出端96条电子轨迹的半径,轴向、径向速度模拟并分析,判断电子注层流性情况,然后对两级降压收集极进行光学设计、结构设计和热分析,装管验证结果表明:实测值结果与理论计算的两级降压收集极各电极电流分配比例、收集极效率等参数接近。Abstract: This paper presents a method for design a suitable two stage depressed collector of X band large duty ratio coupled-cavity traveling wave tube (CC-TWT). The axial, radial velocities and radius of 96 electron trajectories in the output potion of this TWT were simulated and analyzed by 2.5 dimensional interaction package owned by 772nd factory. A refocusing segment was designed to improve the flow of electron injection layer with the help of re-simulation of these parameters. Then a two stage depressed collector was designed with optical design, structural design and thermal analysis. Finally, a TWT was assembled for testing. The measured proportion of the current distribution in every collector electrode and the collector efficiency are close to the analytical full-band average results, which means that this analytical method is suitable for design of two stage depressed collector for high-power CC-TWT.
期刊类型引用(2)
1. 程显,陈辉,葛国伟,陈里昂,杜帅. 真空断路器弧后阶段鞘层发展过程的探针阵列诊断方法. 中国电机工程学报. 2023(08): 3227-3237 . 百度学术
2. 黄小龙,孙韬,冉垠康,冯治国,赵莉华,王立军. 直流开断过程中真空电弧等离子体瞬态特性仿真研究. 广东电力. 2021(12): 28-37 . 百度学术
其他类型引用(2)
-

计量
- 文章访问数: 1368
- HTML全文浏览量: 339
- PDF下载量: 346
- 被引次数: 4