Design of broadband Wilkinson power divider based on particle swarm optimization
-
摘要: 提出了一种采用圆弧型结构的宽频Wilkinson功分器的优化设计方法。在研究奇模-偶模分析理论的基础上,首先,根据奇-偶模分析理论得出设计电路的参数方程,接着采用粒子群算法对方程进行优化,获得具体的设计参数,有效提高功分器的设计效率与准确性。为了验证设计方案的正确性,设计了8~12 GHz的宽带功分器。测试结果显示,在工作频段范围内,各端口回波损耗小于-20 dB,传输损耗小于3.4 dB,隔离度小于-20 dB,实物测试结果与仿真结果吻合良好,验证了设计方法的可行性。
-
关键词:
- Wilkinson功分器 /
- 宽带 /
- 奇-偶模分析 /
- X波段 /
- 粒子群算法
Abstract: A broadband Wilkinson power divider with circular micro-strip line structure is presented. Firstly, the design equation is derived based on the analysis of the odd-even mode. Secondly, particle swarm optimization is used to obtain the design parameters of the Wilkinson power divider. This method improves the efficiency and accuracy of the power divider design. The results show that, in the frequency range of 8-12 GHz, the return loss is less than -20 dB, the ports transmission loss is less than 3.4 dB, and the isolation degree is less than -20 dB. The simulation results are in good agreement with the measured results, which verifies the feasibility of this design.-
Key words:
- Wilkinson power divider /
- broadband /
- even-odd mode analysis /
- X-band /
- particle swarm optimization
-
表 1 宽带Wilkinson功分器的设计参数
Table 1. Design parameters of broadband Wilkinson power splitter
Z1/Ω Z2/Ω r1/mm r2/mm R1/Ω R2/Ω 81.95 59.41 1.60 1.68 73.62 238.54 -
[1] Honari M M, Mirzavand L, Mousavi P, et al. Theoretical design of broadband multisection Wilkinson power dividers with arbitrary power split ratio[J]. IEEE Trans Components, Packaging and Manufacturing Technology, 2016, 6 (4): 605-612. [2] Oraizi H, Sharifi A R. Design and optimization of broadband asymmetrical multisection Wilkinson power divider[J]. IEEE Trans Microwave Theory Tech, 2006, 54 (5): 2220-2231. doi: 10.1109/TMTT.2006.872786 [3] Scardelletti M C, Ponchak G E, Weller T M. Miniaturized Wilkinson power dividers utilizing capacitive loading[J]. IEEE Microwave and Wireless Components Letters, 2002, 12 (1): 6-8. doi: 10.1109/7260.975717 [4] Chao S F, Li Y R. Miniature filtering power divider with increased isolation bandwidth[J]. Electron Lett, 2014, 50 (8): 608-610. [5] Wong S W, Zhu L. Ultra-wideband power divider with good in-band splitting and isolation performances[J]. IEEE Microwave Wireless Compon Lett, 2008, 18 (8): 518-520. [6] 吴锋涛, 张光甫, 梁步阁, 等. 同轴高功率超宽带功分器的研究[J]. 强激光与粒子束, 2006, 18 (7): 1126-1128. http://www.hplpb.com.cn/article/id/2713Wu Fengtao, Zhang Guangfu, Liang Buge, et al. Research on high power divider with ultra-wide-band. High Power Laser and Particle Beams, 2006, 18 (7): 1126-1128 http://www.hplpb.com.cn/article/id/2713 [7] 柳峰, 王鲁豫. 集总元件宽带Wilkinson功分器的研究[J]. 电子元件与材料, 2010, 29 (9): 27-29. https://www.cnki.com.cn/Article/CJFDTOTAL-DZAL201009010.htmLiu Feng, Wang Luyu. Analysis of broad band lumped-element Wilkinson power divider. Electronic Components and Materials, 2010, 29 (9): 27-29 https://www.cnki.com.cn/Article/CJFDTOTAL-DZAL201009010.htm [8] 张毅, 陈明, 张晨露, 等. 基于粒子群算法的3频Wilkinson功分器优化设计[J]. 微波学报, 2013(2): 82-86. https://www.cnki.com.cn/Article/CJFDTOTAL-WBXB201302020.htmZhang Yi, Chen Ming, Zhang ChenLu, et al. Design of tri-band Wilkinson power divider based on particle swarm optimization. Journal of Microwaves, 2013, 29 (2): 82-86 https://www.cnki.com.cn/Article/CJFDTOTAL-WBXB201302020.htm [9] Chongcheawchamnan M, Partisang S, Krairiksh M, et al. Tri-band Wilkinson power divider using a three-section transmission-line transformer[J]. IEEE Microwave Wireless Compon Lett, 2006, 8 (16): 452-456. [10] 黄友火, 刘其中, 魏博文, 等. 天线宽带匹配网络的粒子群优化设计[J]. 微波学报, 2007, 23 (5): 11-13. https://www.cnki.com.cn/Article/CJFDTOTAL-WBXB200705004.htmHuang Youhuo, Liu Qizhong, Wei Bowen, et al. Optimal design of a matching network for a broadband antenna. Journal of Microwaves, 2007, 23 (5): 11-13 https://www.cnki.com.cn/Article/CJFDTOTAL-WBXB200705004.htm [11] Kennedy J, Eberhart R C. Particle swarm optimization[J]. Proc of IEEE Int Conf Neural Networks, 1995, 17 (13): 1942-1948. [12] Robinson J, Rahmat-Sammii Y. Particle swarm optimization in electromagnetics[J]. IEEE Trans Antennas Propag, 2004, 21 (52): 397-407.