Design of variable fundamental power coupler
-
摘要: 旨在设计一支新型、耦合度可调、连续波型高功率输入耦合器，外部品质因数的调节范围为1.5×105~2×106，以适应先进光源技术研发与测试平台超导电子直线加速器束流试验装置不同束流模式下的需要。这是国内首次开展耦合度可调式连续波型高功率输入耦合器的研制。采用HFSS三维电磁仿真软件完成了耦合器的高频结构设计，对耦合器的微波传输、场分布进行了计算；同时采用CST微波工作室对不同内导体天线插入深度下耦合器的外部品质因数进行了仿真计算，结合650 MHz 2单元超导腔进行了耦合度调节实验，仿真计算与实验测试结果基本一致。Abstract: This paper aims to design a new 650MHz variable fundamental power coupler. The external quality factor Qe ranges from 1.5×105 to 2×106 to meet the requirements of different current modes of the Beam Test Facility of PAPS (Platform of Advanced Photon Source Technology R&D). This is the first time to develop a variable continuous wave type power coupler in China. In this paper, the RF transmission and field distribution of the coupler are calculated by HFSS three-dimensional electromagnetic software. The external quality factor at different antenna penetration depth is simulated by CST microwave studio. The penetration depth adjusting experiment is carried out by integrating with a 650 MHz 2-cell superconducting cavity. The simulated and measured results of Qe agree well with each other.
-
图 2 200 kW功率下陶瓷窗的电场强度和磁场强度分布
Figure 2. Window electric field contour and magnetic field contour at power level 200 kW
图 4 200 kW功率下压缩波纹管的电场强度和磁场强度分布
Figure 4. Electric field and magnetic field of compressed bellows at power level 200 kW
图 5 外部品质因数测试系统的框图
Figure 5. Schematic diagram and photo of external quality factor measurement system
图 6 在不同的插入深度Qe的仿真结果与测量结果
Figure 6. Simulated and measured Qe of the FPC for different antenna penetration depth
表 1 耦合器的设计参数
Table 1. Parameters of the fundamental power coupler (FPC)
frequency power Qe coupling type window type impedance 650 MHz 100 kW, CW, TW 1.5×105~2×106 antenna E-coupling single, coaxial disk 50 Ω 
下载: 导出CSV
-
[1] Belomestnykh S. Overview of input power coupler developments, pulsed and CW[C]//Proceedings of 13th International Workshop on RF Superconductivity. 2007. [2] Kindermann, H P, Stirbet M. The variable power coupler for the LHC superconducting cavity[R]. CERN-SL-99-074-HRF, 2000. [3] Belomestnykh S. Review of high power CW couplers for superconducting cavities[C]//Proceedings of the Workshop on High-Power Couplers for Superconducting Accelerators. 2002. [4] Knobloch J, Anders W, Martin M, et al. CW operation of the TTF-Ⅲ input coupler[C]//Proceedings of the 2005 Particle Accelerator Conference. 2005: 3292-3294. [5] Kindermann H P, Veshcherevich V G, Stirbet M, et al. Status of RF power couplers for superconducting cavities at CERN[R]. CERN-SL-96-026-RF. [6] Schmierer E N, Haynes W B, Krawczyk F L, et al. Results of the APT RF power coupler development for superconducting linacs[C]//Proceedings of the 2001 Particle Accelerator Conference. 2001: 1110-1112. [7] Huang Tongming, Pan Weimin, Ma Qiang, et al. High power input coupler development for BEPCⅡ 500 MHz superconducting cavity[J]. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2010, 623(3): 895-902. doi: 10.1016/j.nima.2010.08.108 [8] 黄彤明. 超导腔高功率输入耦合器的研究[D]. 北京: 中国科学院大学, 2009: 14-61.Huang Tongming. Study of high power input power coupler for superconducting cavity. Beijing: Graduate University of Chinese Academy of Sciences, 2009: 14-61 [9] Xu Wencan, Altinbas Z, Belomestnykh S, et al. Design, simulations, and conditioning of 500 kW fundamental power couplers for a superconducting RF gun[J]. Physical Review Special Topics—Accelerators and Beams, 2012, 15: 072001. doi: 10.1103/PhysRevSTAB.15.072001 [10] D'Elia A. Design and characterization of the power coupler line for HIE-ISOLDE high beta cavity[R]. HIE-ISOLDE-Project-Note-0011, 2011. -
点击查看大图
计量
- 文章访问数: 1341
- HTML全文浏览量: 356
- PDF下载量: 122
- 被引次数: 0
