Homemade confined-doped fiber for 10 kW level fiber laser output with good beam quality
-
摘要:
当前光纤激光功率提升受限于模式不稳定效应及非线性效应,为了克服上述功率提升限制因素,自主设计并研制了大模场部分掺杂光纤。最终,采用自研部分掺杂光纤及后向级联泵浦方案,成功实现了10.1 kW的光纤激光输出,对应的光束质量因子(M2)为2.16。
Abstract:Power scaling of high-brightness fiber laser is limited by the mode instability and nonlinear effects. To overcome these limiting factors, a large mode area confined-doped fiber is designed and fabricated. By utilizing the homemade confined-doped fiber and backward tandem pumping scheme, fiber laser with output power of 10.1 kW is successfully achieved, where the corresponding beam quality factor (M2 ) is 2.16.
-
Key words:
- high power /
- fiber laser /
- confined-doped fiber /
- good beam quality
-
-
[1] Zervas M N, Codemard C A. High power fiber lasers: a review[J]. IEEE Journal of Selected Topics in Quantum Electronics, 2014, 20: 0904123. [2] 周朴, 冷进勇, 肖虎, 等. 高平均功率光纤激光的研究进展与发展趋势[J]. 中国激光, 2021, 48:2000001 doi: 10.3788/CJL202148.2000001Zhou Pu, Leng Jinyong, Xiao Hu, et al. High average power fiber lasers: research progress and future prospect[J]. Chinese Journal of Lasers, 2021, 48: 2000001 doi: 10.3788/CJL202148.2000001 [3] 李峰云, 黎玥, 宋华青, 等. 全国产光纤材料器件实现高SRS抑制比20.88 kW输出[J]. 中国激光, 2021, 48:2116002Li Fengyun, Li Yue, Song Huaqing, et al. Homemade fiber enables 20.88 kW laser output with high SRS suppression ratio[J]. Chinese Journal of Lasers, 2021, 48: 2116002 [4] 林傲祥, 肖起榕, 倪力, 等. 国产YDF有源光纤实现单纤20 kW激光输出[J]. 中国激光, 2021, 48:0916003Lin Aoxiang, Xiao Qirong, Ni Li, et al. Homemade YDF active fiber realizes 20 kW laser output[J]. Chinese Journal of Lasers, 2021, 48: 0916003 [5] 陈晓龙, 何宇, 徐中巍, 等. 10kW高效率1070nm光纤放大器的理论与实验研究[J]. 中国激光, 2020, 47:1006001 doi: 10.3788/CJL202047.1006001Chen Xiaolong, He Yu, Xu Zhongwei, et al. Theoretical and experimental investigation of a 10-kW high-efficiency 1070-nm fiber amplifier[J]. Chinese Journal of Lasers, 2020, 47: 1006001 doi: 10.3788/CJL202047.1006001 [6] Ikoma S, Nguyen H K, Kashiwagi M, et al. 3 kW single stage all-fiber Yb-doped single-mode fiber laser for highly reflective and highly thermal conductive materials processing[C]//Proceedings of SPIE 10083, Fiber Lasers XIV: Technology and Systems. 2017: 100830Y. [7] Seah C P, Lim W Y W, Chua S L. A 4kW fiber amplifier with good beam quality employing confined-doped gain fiber[C]//Advanced Solid State Lasers 2018. 2018: AM2A. 2. [8] 张志伦, 张芳芳, 林贤峰, 等. 国产部分掺杂光纤实现3 kW全光纤激光振荡输出[J]. 物理学报, 2020, 69:234205 doi: 10.7498/aps.69.20200620Zhang Zhilun, Zhang Fangfang, Lin Xianfeng, et al. Home-made confined-doped fiber with 3-kW all-fiber laser oscillating output[J]. Acta Physica Sinica, 2020, 69: 234205 doi: 10.7498/aps.69.20200620 [9] Wang Biao, Pang Lu, Liu Jun. Single mode 2.4kW part-doped ytterbium fiber fabricated by modified chemical vapor deposition technique[C]//Proceedings of SPIE 11427, Second Target Recognition and Artificial Intelligence Summit Forum. 2020: 114271X. [10] Huang Zhimeng, Shu Qiang, Luo Yun, et al. 3.5 kW narrow-linewidth monolithic fiber amplifier at 1064 nm by employing a confined doping fiber[J]. Journal of the Optical Society of America B, 2021, 38(10): 2945-2952. doi: 10.1364/JOSAB.436225 [11] 吴函烁, 安毅, 肖虎, 等. 国产部分掺杂光纤实现7 kW高光束质量激光输出[J]. 中国激光, 2021, 48:2416002Wu Hanshuo, An Yi, Xiao Hu, et al. Homemade confined-doped fiber enables 7 kW laser output with good beam quality[J]. Chinese Journal of Lasers, 2021, 48: 2416002 [12] Wu Hanshuo, Li Ruixian, Xiao Hu, et al. First demonstration of a bidirectional tandem-pumped high-brightness 8 kW level confined-doped fiber amplifier[J]. Journal of Lightwave Technology, 2022, 40(16): 5673-5681. doi: 10.1109/JLT.2022.3183381