Double-cell experimental study of linear transformer drivers
-
摘要: 基于脉冲成形加感应叠加技术路线是实现脉冲功率小型化的重要发展方向之一。介绍了设计的直线变压器驱动源单元模块结构,每一单元模块馈入阻抗为2.5 、脉冲宽度为200 ns的高压脉冲,两个模块输出的高压脉冲经过阴极杆感应叠加后输出至负载。实验结果表明:在工作电压40 kV、重复频率20 Hz及40 Hz条件下,两个单元模块经磁芯感应叠加后输出波形的抖动约为2 ns,波形质量与脉冲形成网络直接对匹配负载放电时十分吻合,且各次波形的重复性、一致性较好。Abstract: The technical path combining pulse forming with inductive adding is one of the important candidates to realize pulsed power miniaturization. In this paper, the cell structure of the linear transformer driver(LTD), which is based on pulse forming network(PFN), with impedance 2.5 and pulse width 200ns is introduced. The outputs of two such LTDs are inductively added to a load through the cathode pole, which forms a double-cell module based on the LTDS. The experiment results show that the high-voltage pulse waveform from the double-cell module at charging voltage of 40 kV and repetition frequency of 20 Hz/40 Hz accords with that from PFN discharged directly, and its jitter is about 2 ns. The coherence of the output pulse waveforms is quite good at repetition mode.
-
Key words:
- pulse forming network /
- linear transformer driver /
- double-cell module /
- jitter
期刊类型引用(2)
1. 何泳成,吴煊,张玉亮,朱鹏,薛康佳,王林,李明涛,傅世年. BNCT02加速器机器保护系统设计. 强激光与粒子束. 2025(01): 74-80 . 本站查看
2. 唐旭辉,何俊,岳军会,魏书军,杜垚垚,麻惠洲,刘智,杨静,高国栋,曹建社,王安鑫,随艳峰,叶强. 束流位置探测器自动标定系统研制. 核技术. 2022(02): 12-19 . 百度学术
其他类型引用(2)
-

计量
- 文章访问数: 2064
- HTML全文浏览量: 249
- PDF下载量: 488
- 被引次数: 4