全固态kHz啁啾脉冲飞秒激光放大器
kHz pulse-pumped Ti:sapphire regenerative amplifier
-
摘要: 要建造大功率超强激光系统,必须将nJ量级的种子进行放大,以得到mJ量级以及更高能量的激光输出。为达到这个目的,必须使种子能量指数增加,再生腔放大器是实现这一目的的良好途径;同时,为了得到更稳定的激光输出,须采用高重复频率的泵浦源。为此,设计了一种kHz重复频率激光泵浦的再生放大器,使用15 mJ的527 nm的绿光泵浦,得到了约2.3 mJ的800 nm放大激光输出,同时,对其输出激光的光谱特性进行了测量,将带宽为40 nm的种子注入后,得到了光谱带宽约为30 nm激光输出。Abstract: In order to get ultra-short intensity laser pulses, it is necessary to amplify the laser pulses from nJ level to mJ level. The regenerativeamplifier is the best way to get high-energy laser pulse. It can amplify the seed from nJ level to mJ level quickly. And the output laser has a good spatial mode. A Ti:sapphire regenerative amplifier was designed in this paper.Otherwise, in order to make the output laser stable, a 1 kHz 527 nm green laser was used as the pump laser in the experiment. Using such a Ti:sapphire regenerative amplifier, a 12 nJ seed which was generated from a self mode-locking Ti:sapphire oscillator was amplified to energy of 2.3 mJ in a pulse at 1 kHz. The spectrum of the amplifier was also measured. When the 40 nm seed was injected into the cavity, a laser output of about
-
Key words:
- femtosecond laser /
- cpa /
- regenerative amplifier
点击查看大图
计量
- 文章访问数: 2762
- HTML全文浏览量: 270
- PDF下载量: 902
- 被引次数: 0