传输线充电技术实现高功率亚纳秒电磁脉冲调制
Realization of subnanosecond power conditioning by using transmission line charging technique
-
摘要: 分析比较了阻抗匹配和失配情况下传输线充电的原理和波过程。分析结果表明：失配情况下的最大优点是能够实现脉冲功率增益。应用阻抗为27 W、长度为540 mm传输线为充电传输线和长度分别为30,45,60 mm、阻抗均为5 W传输线为被充电传输线进行了对比试验。实验结果表明：在距离辐射天线6 m处，输出辐射场强随低阻抗传输线长度增加而略有增加，最大辐射场强为49 kV/m,考虑气体开关的实际能量损耗，这与理论分析的充电电压和功率增益关系相吻合；长度为45 mm的5 W被充电传输线的输出脉冲前沿约210 ps,幅度约为150 kV。Abstract: The wave process and principle of the transmission line charging in impedance matched and mismatched condition are analyzed. The results show that the impedance mismatched charging technology can realize the power gain but lower the energy efficiency, while the impedance matched charging technology can obtain an energy transmission efficiency of 100%, but can’t realize the power gain. The radiation fields of the 5 W charged transmission line with length of 30, 45, 60 mm are studied experimentally, using 27 W charging transmission line, which is 540 mm long. A output pulse with risetime about 210 ps and peak voltage about 150 kV is obtained on the 5 Ω charged line, which is 45 mm long. The radiation electric field increases a little as the length of the charged transmission line increases
-
点击查看大图
计量
- 文章访问数: 2813
- HTML全文浏览量: 210
- PDF下载量: 572
- 被引次数: 0
下载:
