折射-衍射混合高精度平行光管的设计

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名

邮箱

手机号码

标题

留言内容

验证码

Design of hybrid refractive and diffractive collimator with high accuracy

1.
Opoelectronics Engineering College,Changchun University of Science and Technology,Changchun 130022,China;
2.
Control Department,Armor Technique Institute of People’s Liberation Army,Changchun 130117,China;
3.
Applied Optics Laboratory,Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China

摘要: 平行光管是安装、调校、测试光学仪器的重要工具之一，也是光学量度仪器中的重要组成部分。为了提高平行光管的测量精度，利用衍射元件的特殊色差特性和像差特性，提出了折射-衍射混合平行光管的设计方案，系统的入瞳口径为80 mm，焦距为500 mm，系统总长小于550 mm。设计结果表明，系统的最大弥散斑直径为5.2 mm，角分辨率小于4.3″，在空间频率50 lp/mm处，系统的调制传递函数高于0.8，接近衍射极限。
- 平行光管 /
- 衍射元件 /
- 光学设计 /
- 复消色差
Abstract: Collimator is one of the key tools to assemble, correct, adjust and test optical instrument, and it is an important part of the measuring instrument. In order to improve the measure accuracy, based on the particular aberration property of the diffraction optical element, the hybrid refractive- diffractive aberration correction method is put forward. The diameter of the collimator is 80 mm, the focal length is 500 mm. The overall length is less than 550 mm. The resolution is less than 4.3″. Having been optimized, the maximum spot is 5.2 mm, and the modulation transfer function(MTF) at 50 lp/mm is over 0.8, better than the conventional method.
- collimator /
- diffraction optical element /
- optical design /
- apochromatism

点击查看大图