脊波导在速调管输出组件中的应用
Ridge waveguide in output circuit of klystron
-
摘要: 在新型L波段多注速调管的研制中,为了降低电磁聚焦系统的设计难度,需要减小输出波导的截面尺寸。为此,提出了在速调管输出组件中应用脊波导的方案。针对该型速调管的要求,设计了完整的脊波导输出组件并进行验证。计算结果表明,这种采用了脊波导的速调管输出组件,能够在10%的带宽内达到1.2以下的驻波比,理论功率容量达到490 MW。采用了该方案的组件尺寸紧凑,加工方便,调试容易。Abstract: In the development of a new L band klystron, in order to reduce the size, weight and power waste of magnetic focusing system, the size of output waveguide should be reduced. To solve this problem, a ridge waveguide was used in the output circuit. To validate this method, a ridge waveguide output circuit was designed and tested. The circuit’s voltage standing wave ratio is under 1.2 within 10% band width and theoretical power capacity is 490 MW.The output circuit with a ridge waveguide is compact and easy to make and test,and it has been used in the L band klystron.
-
Key words:
- klystron /
- focusing system /
- ridge waveguide /
- output circuit /
- power capacity
点击查看大图
计量
- 文章访问数: 1934
- HTML全文浏览量: 200
- PDF下载量: 371
- 被引次数: 0