1 MA直线型变压器驱动源模块设计
Design of 1 MA linear transformer driver stage
-
摘要: 介绍了输出电流幅值为1 MA，电流上升时间为100 ns的快脉冲直线型变压器驱动源（LTD）模块的设计。模块由48个子块并联组成，每个子块由2个电容器和一个多级气体开关串联组成。48个开关由8路高压脉冲触发，每路高压脉冲（100 kV/50 ns）触发6个开关。电路模拟显示，在充电 90 kV条件下，输出电流幅值为1.04 MA，电流上升时间为84.5 ns（0~100%）和52 ns（10%~90%）。电路模拟时的参数设置以实验数据为基础，开关的工作条件与已研制成功的100 kA-LTD模块中的开关工作条件近似，模块设计工作于腔体注油状态以保证高压运行安全，能够保证模块达到设计要求。
-
关键词:
- 快脉冲直线型变压器驱动源 /
- 多级气体开关 /
- 电路模拟 /
- 机械设计
Abstract: The design of a 1 MA linear transformer driver(LTD) stage is introduced, whose current risetime is 100 ns. The stage consists of 48 parallel bricks, each of which consists of two capacitors (40 nF/100 kV) and a multi-gap gas switch in series. The 48 switches are triggered by 8 high voltage pulses (100 kV/50 ns) with each pulse triggering 6 switches. According to the simulation results, when charged to 90 kV, the output current of this stage is 1.04 MA, and the current risetime is 84.5 ns (0~100%) and 52 ns (10%~90%). Simulation is based on experimental data. Work conditions of the switches are similar to those in 100 kA-LTD stage which has been tested successfully before. The 1 MA-LTD stage will be filled with transformer oil to ensure safty when charged to high voltage. -
点击查看大图
计量
- 文章访问数: 1948
- HTML全文浏览量: 264
- PDF下载量: 587
- 被引次数: 0
下载:
