Marx调制器单元设计和叠加测试
Design and multi-cell test of Marx solid-state modulator
-
摘要: 基于单元器件的成功研制，介绍了Marx调制器单元充放电回路、电压和电流的实时监测以及控制系统和连锁保护等功能的设计和实现。对IGBT固态开关的静态、动态均压进行分析和模拟，采用RCD缓冲电路实现IGBT的动态均压；对控制系统改进和优化，设计了专用电源转换模块；分压电路和电流霍尔采样回路分别实现调制器单元电压和电流的检测；连锁保护功能由控制系统和继电器控制完成。所有部件按照电气标准设计在调制器单元支架上。经过测试的4个单元进行了叠加试验，4个单元总输出24 kV，各器件在高压试验中工作正常。Abstract: The Marx solid-state modulator, designed for international linear collider(ILC), is a Marx-type modulator which uses integrated gate bipolar transistors (IGBTs) as switch. This article introduces the design and test of Marx cell, which includes charge and discharge circles, real-time monitor for voltage and current, control system and protective interlocks. It also introduces voltage balance of IGBTs and takes some simulations for that. Components were laid out on the unit bracket of Marx solid-state modulator according to electrical standard. Four Marx cells have passed the multi-cell HV test and output a superimposed voltage of 24 kV. All the components worked well in HV test.
-
Key words:
- marx solid-state modulator /
- igbt /
- rcd snubber /
- cell layout /
- four-cell test
-
点击查看大图
计量
- 文章访问数: 2035
- HTML全文浏览量: 281
- PDF下载量: 478
- 被引次数: 0
下载:
