Design of broadband relativistic klystron amplifier
-
摘要: 设计了一种用于S波段、工作带宽10%的相对论速调管放大器结构。该宽带管采用多间隙输入腔、两个中间腔和重叠模双间隙输出腔来拓展相对论速调管放大器(RKA)群聚段和输出段的带宽, 模拟得到基波调制深度大于80%时, RKA群聚段和输出段的带宽分别为11%和15%。整管模拟时, 通过调节注入微波频率和功率, 得到最大功率1.58 GW、3 dB相对工作带宽10%、带内微波功率不小于1 GW的输出微波。Abstract: With the electromagnetic code, the buncher and output section of an S-band broadband relativistic klystron amplifier (RKA) are designed and calculated. Three stagger-tuned bunching cavities are used to modulate the electron beam to achieve a bandwidth of 11% when the depth of the fundamental harmonic current is not less than 80%. In order to enhance the bandwidth of the output circuit for RKA, the overlapped mode double-gap output cavity is modeled and simulated. The two modes are overlapped when the structure parameters of the output cavity are appropriate. And the output circuit bandwidth reaches 15% at 80% depth of the fundamental harmonic current. A maximum output power of 1.58 GW and a 10% working bandwidth of 3 dB are obtained by adjusting the frequency and the power of the driven microwave in the particle-in-cell simulation with the designed structure of the whole broadband relativistic klystron amplifier, and the power in the bandwidth is not less than 1 GW.
-
Key words:
- S-band /
- relativistic klystron amplifier /
- broadband /
- buncher section /
- output section
-
点击查看大图
计量
- 文章访问数: 1063
- HTML全文浏览量: 154
- PDF下载量: 328
- 被引次数: 0
下载:
