High-voltage pulse generator based on pulse transformer and pulse forming net
-
摘要: 为了满足在高电压状态下对氧化锌陶瓷(ZnO)元件的检测需要,研制了一种基于脉冲变压器和脉冲形成网络(PFN)的,输出电压范围10~80 kV可调,波形为近方波的高压脉冲源。根据实际研制过程,分别介绍了高压脉冲源的设计、仿真及系统电路构建。测试了高压脉冲源在标准负载(匹配)和氧化锌陶瓷负载上的输出情况。结果显示:脉冲顶降小于3%,顶部波动小于1.5%,前后沿指标均满足要求。因而,高压脉冲源可以用于氧化锌陶瓷的性能检测。Abstract: To test character of ZnO ceramics resistor undergoing high-voltage, a high-voltage pulse generator whose output pulse is approximately square and voltage amplitude varies between 10-80 kV was designed adopting pulse transformer and pulse forming net (PFN). The article introduces the principle, simulation, circuits of the high-voltage pulse generator, and elaborates output states of the power supply with a standard ZnO load. Test results show that the fall on the top of the waveform is less than 3 percent, the pulse top fluctuation is less than 1.5%, and pulse rising edge and falling edge all meet the requirements. The results show that the high voltage pulse source can be used for performance testing of ZnO ceramics.
-
Key words:
- pulse transformer /
- pulse forming net /
- high voltage pulse generator /
- hydrogen thyratron /
- ZnO ceramics
期刊类型引用(3)
1. 宋孝宗,姚统,徐国敏. TiO_2纳米颗粒胶体活化系统设计及流场仿真分析. 兰州理工大学学报. 2020(03): 75-80 . 百度学术
2. 徐国敏,戴旭杰,姚统,宋孝宗. 余弦光-液耦合喷嘴参数优化及射流抛光实验. 现代制造工程. 2019(05): 52-56 . 百度学术
3. 张航航,宋孝宗. 矩形光液耦合喷嘴的流场特性分析. 制造业自动化. 2019(12): 31-35 . 百度学术
其他类型引用(4)
-

计量
- 文章访问数: 1764
- HTML全文浏览量: 369
- PDF下载量: 322
- 被引次数: 7