2019 Vol. 31, No. 8

Recommend Articles
RF system of a 220 GHz extended interaction klystron
Wang Zicheng, Qu Zhaowei, Shang Xinwen, Cao Linlin, Tang Bojun, Xiao Liu
2019, 31: 083101. doi: 10.11884/HPLPB201931.180312
Development of cascade high voltage repetitive frequency microsecond pulse power supply
Li Zhijun, Zhang Yawen, Gao Yinghui, Han Jing
2019, 31: 085001. doi: 10.11884/HPLPB201931.190040
Parasitic mode loss measurement in BEPCⅡ e- ring
Wang Honglei, Wang Muyuan, Yang Jisen, Sha Peng, Lin Haiying, Ma Qiang, Wang Qunyao, Mi Zhenghui, Dai Jianping, Sun Yi, Wang Guangwei, Pan Weimin
2019, 31: 085102. doi: 10.11884/HPLPB201931.190064
High Power Laserand Optics
Measurements of the spectrum of atmospheric temperature fluctuations based on broadband micro-temperature sensor
Ren Pengfei, Cui Chaolong, Liu Qing, Huang Honghua
2019, 31: 081001. doi: 10.11884/HPLPB201931.190048
Abstract:
The frequency spectrum of turbulence measured by common micro-temperature sensor is mostly below 20 Hz, which can not show the high frequency characteristics of atmospheric temperature fluctuation.This paper introduces the design of a broadband low n...
Estimating the profiles of atmospheric turbulence above Korla, Maoming, Lhasa by Thorpe scale
Hu Xiaodan, Su Changdong, Luo Tao, Qing Chun, Sun Gang, Liu Qing, Li Xuebin, Zhu Wenyue, Wu Xiaoqing
2019, 31: 081002. doi: 10.11884/HPLPB201931.190074
Abstract:
The sounding balloons released from Korla, Maoming, Guangdong and Lhasa, Tibet, have been used to measure the profiles of temperature, air pressure and wind velocity and the refractive index structure constants of the atmosphere.Based on the optical ...
ICFand Laser Plasma
Damage and damage growth of fused silica optical elements under multi-wavelength irradiation
Qiu Rong, Jiang Yong, Guo Decheng, Ye Cheng, Shi Jinfang, Zhou Qiang, Han Wei, Huang Jin
2019, 31: 082001. doi: 10.11884/HPLPB201931.190211
Abstract:
The initial damage and damage growth of fused quartz optical elements irradiated by fundamental frequency, double frequency and triple frequency lasers alone and at the same time are studied comparatively.The effects of fundamental and double frequen...
High Power Microwave
Design of high-order rotatingmode generator with helically-distributed perforation
Yu Xinhua, Ye Shuntao, Fu Wenjie, Niu Xinjian
2019, 31: 083001. doi: 10.11884/HPLPB201931.180277
Abstract:
For the shortcomings of unknown mode purity and apparently ambiguous design idea in the literature (Danilov, 2007), an improved rotating high-order mode generator based on the helically-distributed perforation (HDP) technique is presented to realize ...
Analysis and design of low frequency radiation characteristics of TEM horn antenna
Wang Lili, Hou Rongpu, Yuan Yanning
2019, 31: 083002. doi: 10.11884/HPLPB201931.180275
Abstract:
Improving antenna performance at low frequency is the focus of TEM horn antenna research.A new TEM horn antenna was designed by analyzing the impedance gradient and time-domain radiation characteristics of the antenna, to solve the reflection problem...
Terahertz Technology
RF system of a 220 GHz extended interaction klystron
Wang Zicheng, Qu Zhaowei, Shang Xinwen, Cao Linlin, Tang Bojun, Xiao Liu
2019, 31: 083101. doi: 10.11884/HPLPB201931.180312
Abstract:
An extended interaction klystron (EIK), which is composed of an input cavity and an output cavity both based on 8 periods of staggered double rectangular waveguide structure (SDRWS) and an intermediate cavity based on 6 periods of SDRWS, is calculate...
Study of current density distribution in terahertz device micro-electroforming process
Zhao Xinyue, Ji Shengwei, Lu Yiru, Liu Yubao, Huang Bo, Wang Xiaokang
2019, 31: 083102. doi: 10.11884/HPLPB201931.190067
Abstract:
Micro-electroforming is a key step of terahertz all-metal devices microfabrication, in which metal-ion deposit uniformity determines the grating's quality.Meanwhile, the deposit uniformity is influenced by the distribution of current density near the...
Complex Electromagnetic Environment
Evaluation of electromagnetic shielding effectiveness for loaded metallic enclosures with apertures based on machine learning
Liu Zhengyang, Yan Liping, Zhao Xiang
2019, 31: 083201. doi: 10.11884/HPLPB201931.190079
Abstract:
A machine learning based evaluation method for shielding effectiveness (SE) of loaded metallic enclosures with apertures under electromagnetic wave radiation is proposed.The SEs of a variety of metallic enclosures loaded with different printed circui...
A time-domain method for the electromagnetic transient response of multiconductor transmission lines excited by the electromagnetic pulse
Gong Yanfei, Hao Jianhong, Jiang Luxing
2019, 31: 083202. doi: 10.11884/HPLPB201931.180378
Abstract:
An efficient field-to-line coupling method in the time-domain is developed based on the waveform relaxation (WR) techniques for evaluating the electromagnetic (EM) transient response of multiconductor transmission lines (MTLs) excited by an electroma...
Micro-nano Technology
Design of interdigital-filter based diplexer with high isolation and wideband
Gao Yang, Wen Shuwen, Yuan Jing, Xu Xiaqian
2019, 31: 084101. doi: 10.11884/HPLPB201931.180308
Abstract:
For diplexer with high isolation and wideband in wireless communication system, in this paper, the diplexer specification is divided into Tx and Rx filter specifications with a certain margin.Then the wideband Tx and Rx filter is designed by using th...
Compact model of millimeter wave noise in nano-MOSFET
Liu Renhao, Wang Jun
2019, 31: 084102. doi: 10.11884/HPLPB201931.190059
Abstract:
In order to apply the complex physical model of millimeter-wave noise of nano-MOSFET to engineering design, the expression of its compact model is studied. The complex noise physical model is simplified by transforming and analyzing the two-port corr...
Pulsed Power Technology
Development of cascade high voltage repetitive frequency microsecond pulse power supply
Li Zhijun, Zhang Yawen, Gao Yinghui, Han Jing
2019, 31: 085001. doi: 10.11884/HPLPB201931.190040
Abstract:
In this paper, a cascade high voltage microsecond pulse power supply with output voltage of 20 kV is developed. The voltage level of a single module is 500 V, which reduces the insulation withstand high voltage requirements of the device. The output ...
Accelerator Technology
Contact stiffness measurement based on modal matching method
Wang Zihao, Li Chunhua, Wang Zhizhuo, Wang Haijing, Qu Huamin
2019, 31: 085101. doi: 10.11884/HPLPB201931.190033
Abstract:
In the simulation of the accelerator magnet support system, the parts connected to the ground by the magnet bracket are usually treated as “fixed”, but in some cases, this treatment will cause a large error between the simulation results and the meas...
Parasitic mode loss measurement in BEPCⅡ e- ring
Wang Honglei, Wang Muyuan, Yang Jisen, Sha Peng, Lin Haiying, Ma Qiang, Wang Qunyao, Mi Zhenghui, Dai Jianping, Sun Yi, Wang Guangwei, Pan Weimin
2019, 31: 085102. doi: 10.11884/HPLPB201931.190064
Abstract:
In the design phase of BEPCII, the impedance is limited in terms of beam instabilities and parasitic mode loss. However, the parasitic mode loss has been one of the unfavorable factors affecting high beam current operation of BEPCII. This paper descr...
Embedded EPICS based beam loss monitor system of HLS-Ⅱ storage ring
Cai Yuanqi, Tang Leilei, Zhou Zeran
2019, 31: 085103. doi: 10.11884/HPLPB201931.190041
Abstract:
A new beam loss monitor system based on embedded EPICS is developed for the top-off upgrade of HLS-Ⅱ, to monitor the position and value of beam loss of storage ring. The electron shower signals are obtained by the double PIN photodiode detectors arou...
Development of peak power meter based on logarithmic detector
Wang Xiangjian, Zhao Fengli, He Xiang, Zhang Jingru, Dong Dong
2019, 31: 085104. doi: 10.11884/HPLPB201931.190086
Abstract:
To improve the measurement accuracy of peak power meter of BEPCII linear accelerator, further reduce the response time of reflection protection alarm and provide real-time waveform detection means, the RF detector chip based on integrated circuit has...
Analysis of the failure of BEPCⅡ SRF cavities
Xiao Linge, Dai Jianping, Wang Qunyao, Lin Haiying, Ma Qiang, Mt Zhenghui, Sun Yi, Wang Honglei
2019, 31: 085105. doi: 10.11884/HPLPB201931.190078
Abstract:
Taking BEPCII superconducting RF (SRF) cavity as an example, this paper analyzes several common causes of the SRF cavity failure, including hardware failure of RF system, beam loss and mechanical failure of the tuner, by combining theoretical calcula...
Cold test and cavity tuning for ion source injected IH cavity
Zhao Liangchao, He Xiaozhong, Pang Jian, Ma Chaofan, Shi Jinshui
2019, 31: 085106. doi: 10.11884/HPLPB201931.190066
Abstract:
Aimed to prove the capture efficiency of ion source injected Interdigital H mode (IH) cavity, a short linac is under construction in Institute of Fluid Physics, CAEP. Protons could be accelerated from 0.04 MeV to 2.4 MeV with this linac. The cavity w...
Nuclear Science and Engineering
Influence analysis of discharge branch on the reliability of quench protection system in CFETR
Tong Wei, Song Zhiquan, Fu Peng, Li Hua, Zhang Xiuqing, Wang Shusheng
2019, 31: 086001. doi: 10.11884/HPLPB201931.190050
Abstract:
China fusion engineering test reactor(CFETR) is a magnetic confinement fusion device designed, which used high current magnetic field in the superconducting coil to generate high intensity magnetic field, thus constraining the high-temperature plasma...
Study of gamma irradiation effect on the 4H-SiC detector
Li Zheng, Wu Jian, Bai Zhongxiong, Wu Kunlin, Fan Yikui, Jiang Yong, Yin Yanpeng, Xie Qilin, Lei Jiarong
2019, 31: 086002. doi: 10.11884/HPLPB201931.180345
Abstract:
To investigate 4H-SiC detector’s resistance to gamma irradiation, the detector was irradiated by 60Co gamma-ray(about 4×105 Ci), and the maximum cumulative dose was 1 MGy. The detector’s I-V characteristics and its performance in detecting charged pa...
Cover and Contents
Cover and Contents, High Power Laser and Particle Beams, No 8, Vol 31, 2019
2019, 31: 1-3.