Near-field coupling simulation and preliminary validation test</p>

Zhong Longquan; Cao Xuejun; Zhao Gang; Lin Jiangchuan

doi:10.11884/HPLPB201527.103228

Volume 27 Issue 10

Oct. 2015

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2015 > 27(10): 103228

Zhong Longquan, Cao Xuejun, Zhao Gang, et al. Near-field coupling simulation and preliminary validation test[J]. High Power Laser and Particle Beams, 2015, 27: 103228. doi: 10.11884/HPLPB201527.103228

Citation:

Zhong Longquan, Cao Xuejun, Zhao Gang, et al. Near-field coupling simulation and preliminary validation test

[J]. High Power Laser and Particle Beams, 2015, 27: 103228. doi: 10.11884/HPLPB201527.103228

Citation:

Zhong Longquan, Cao Xuejun, Zhao Gang, et al. Near-field coupling simulation and preliminary validation test

[J]. High Power Laser and Particle Beams, 2015, 27: 103228. doi: 10.11884/HPLPB201527.103228

PDF( 2278 KB)

Near-field coupling simulation and preliminary validation test

doi: 10.11884/HPLPB201527.103228

1.
Complicated Electromagnetic Environment Laboratory of China Academy of Engineering Physics,Mianyang 621900,China;
2.
Science and Technology on High Power Microwave Laboratory,Institute of Applied Electronics,CAEP,P.O.Box 919-1015,Mianyang 621900,China

Received Date: 2015-06-01
Rev Recd Date: 2015-07-17
Publish Date: 2015-10-13

Abstract

Abstract

To meet the validation test requirement of a models near-field coupling simulation results, a measurement system based on a fiber electric field sensor was set up. The preliminary test results showed that in some angle range the test results and simulation results followed the same trend. The causes of discrepancy between the two were analyzed. This work laid foundation for the next model optimization and measuring improvement.
- near-field measurement,
- fiber electric field sensor,
- coupling,
- validation test