Design and experimental research of high power repetitive pulse charging power supply

Gan Yanqing; Song Falun; Li Fei; Luo Guangyao; Zhang Beizhen; Wang Ganping; Gong Haitao; Jin Xiao

doi:10.11884/HPLPB201830.170335

Volume 30 Issue 6

Jun. 2018

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2018 > 30(6): 065003

Gan Yanqing, Song Falun, Li Fei, et al. Design and experimental research of high power repetitive pulse charging power supply[J]. High Power Laser and Particle Beams, 2018, 30: 065003. doi: 10.11884/HPLPB201830.170335

Citation:

Gan Yanqing, Song Falun, Li Fei, et al. Design and experimental research of high power repetitive pulse charging power supply[J]. High Power Laser and Particle Beams, 2018, 30: 065003. doi: 10.11884/HPLPB201830.170335

Citation:

PDF( 2714 KB)

Design and experimental research of high power repetitive pulse charging power supply

doi: 10.11884/HPLPB201830.170335

Science and Technology on High Power Microwave Laboratory, Institute of Applied Electronics, CAEP, P.O.Box 919-1015, Mianyang 621900, China

Received Date: 2017-08-29
Rev Recd Date: 2017-12-26
Publish Date: 2018-06-15

Abstract

Abstract

Based on the need of high power repetitive pulse power source, the repetitive frequency characteristics of high power pulse charging power supply are studied in this paper. The constant current charging technology based on the full bridge series resonant charging principle is analyzed. According to the work requirement of high power Marx type pulse power source, the key parameters of the series resonant charging are calculated. The compact high power pulse charging power supply, with the maximum output voltage ±50 kV, the charging current 2.5 A and the repetition frequency 1-50 Hz, can run stably for a long time under the condition of repetition frequency. The charging power supply has the advantages of small volume, light weight, strong anti-interference ability and strong resistance to short circuit, and has been applied to the research of high power repetitive pulse power source technology, in which it has achieved 100 000 times repetition-frequency operation without fault.
- pulsed power technology,
- Marx generator,
- repetitive frequency,
- series resonant charging

FullText(HTML)

References(8)

References

[1]	刘锡三. 高功率脉冲技术[M]. 北京: 国防工业出版社, 2005. Liu Xisan. High pulsed power technology. Beijing: National Defense Industry Press, 2005
[2]	Goebel D M. High power modulator for plasma ion implantation[J]. Vacuum Science Technology, 1994, 12(2): 838-842. doi: 10.1116/1.587356
[3]	Kim J H, Rim G H, Jin H M. IGBT Stacks based pulse power generator for PⅢ & D[C]//IEEE Pulse Power Conf. 2005: 1012-1017.
[4]	Rim G H, Kim T K. Solid state Marx generator using series connected IGBTs[C]//IEEE International Power Modulator Conference. 2004: 567-571.
[5]	苏建仓, 王利民, 丁永忠, 等. 串联谐振充电电源分析及设计[J]. 强激光与粒子束, 2004, 16(12): 1611-1614. http://www.hplpb.com.cn/article/id/547 Su Jiancang, Wang Limin, Ding Yongzhong, et al. Analysis and design of series resonant charging power supply. High Power Laser and Particle Beams, 2004, 16(12): 1611-1614 http://www.hplpb.com.cn/article/id/547
[6]	钟和清, 徐至新, 邹云屏, 等. 寄生电容对串联谐振电容器充电电源特性的影响[J]. 中国电机工程学报, 2005, 25(10): 40-44. https://www.cnki.com.cn/Article/CJFDTOTAL-ZGDC200510007.htm Zhong Heqing, Xu Zhixin, Zou Yunping, et al. Effects of parasitical capacitors on charging characteristic of series resonant CCPS. Proceedings of the CSEE, 2005, 25(10): 40-44 https://www.cnki.com.cn/Article/CJFDTOTAL-ZGDC200510007.htm
[7]	马勋, 李洪涛. 大功率全桥串联谐振充电电源理论设计[J]. 电子设计工程, 2013, 21(8): 50-52. https://www.cnki.com.cn/Article/CJFDTOTAL-GWDZ201308042.htm Ma Xun, Li Hongtao. Design of high power full bridge series resonant charging power supply. Electronic Design Engineering, 2013, 21(8): 50-52 https://www.cnki.com.cn/Article/CJFDTOTAL-GWDZ201308042.htm
[8]	张晋琪, 张现福, 杨周炳, 等. 全电感隔离型重复频率Marx发生器[J]. 强激光与粒子束, 2009, 21(4): 637-640. http://www.hplpb.com.cn/article/id/4023 Zhang Jinqi, Zhang Xianfu, Yang Zhoubing, et al. Repetitive Marx generator with inductive isolators. High Power Laser and Particle Beams, 2009, 21(4): 637-640 http://www.hplpb.com.cn/article/id/4023