Design and realization of servo system for phased array antenna of high power microwave

Gao Ningbo; Yao Hongping; Liu Chaoyang; Shen Haofeng; Tian Weiqiang; Gao Guohua

doi:10.11884/HPLPB201830.180018

Volume 30 Issue 9

Sep. 2018

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > High Power Laser and Particle Beams > 2018 > 30(9): 093002

Qing Chun, Wu Xiaoqing, Li Xuebin, et al. Forecast upper air optical turbulence based on weather research and forecasting model[J]. High Power Laser and Particle Beams, 2015, 27: 061009. doi: 10.11884/HPLPB201527.061009

Citation:

Gao Ningbo, Yao Hongping, Liu Chaoyang, et al. Design and realization of servo system for phased array antenna of high power microwave[J]. High Power Laser and Particle Beams, 2018, 30: 093002. doi: 10.11884/HPLPB201830.180018

Citation:

PDF( 5009 KB)

Design and realization of servo system for phased array antenna of high power microwave

doi: 10.11884/HPLPB201830.180018

The 27th Research Institute of CETC, Zhengzhou 450047, China

Received Date: 2018-01-16
Rev Recd Date: 2018-04-02
Publish Date: 2018-09-15

Abstract

Abstract

In a high power microwave system, the precise control of the microwave beam is achieved by controlling the position of the multichannel phase shifter. In the design of servo control system, in order to reduce the interference and damage of the strong electromagnetic field to the servo system, the control system conceptual design, phase shifter design, position sensor design, position loop design, circuit board design, chassis design, transmission cable and other aspects are strictly executed and handled. During the design process, field experiments were carried out for the verification and selection of the key components. Consequently, the high-power microwave system is stable and reliable, and the beam control achieves the expected precision (0.1 mm) in a test of continuous radiation on the target.
- servo control,
- stepping motor,
- position loop,
- control accuracy of beam,
- phase shifter

FullText(HTML)

References(10)

References

[1]	王邦继, 刘庆想, 张政权, 等. 机械相控阵列天线的电机控制系统设计[J]. 强激光与粒子束, 2012, 23(11): 3123-3126. http://www.hplpb.com.cn/article/id/5511 Wang Bangji, Liu Qingxiang, Zhang Zhengquan, et al. Design of motor control system for mechanical phased array antenna. High Power Laser and Particle Beams, 2012, 23(11): 3123-3126 http://www.hplpb.com.cn/article/id/5511
[2]	周磊, 刘庆想, 李相强, 等. 用于阵列天线连续跟踪的步进电机控制器IP核设计[J]. 强激光与粒子束, 2011, 23(11): 3099-3102. http://www.hplpb.com.cn/article/id/5501 Zhou Lei, Liu Qingxiang, Li Xiangqiang, et al. Design of stepping motor control IP core for array antenna successive scanning. High Power Laser and Particle Beams, 2011, 23(11): 3099-3102 http://www.hplpb.com.cn/article/id/5501
[3]	周一飞, 刘庆想, 李相强, 等. 螺旋天线步进电机控制系统仿真及运行曲线优化[J]. 强激光与粒子束, 2014, 26: 063020. doi: 10.11884/HPLPB201426.063020 Zhou Yifei, Liu Qingxiang, Li Xiangqiang, et al. Simulation of helical antenna stepper motor control system and optimization of running curve. High Power Laser and Particle Beams, 2014, 26: 063020 doi: 10.11884/HPLPB201426.063020
[4]	王邦继, 刘庆想, 周磊, 等. FPGA在多轴步进电机控制器中的应用[J]. 电机与控制学报, 2012, 16(3): 78-82. https://www.cnki.com.cn/Article/CJFDTOTAL-DJKZ201203014.htm Wang Bangji, Liu Qing-xiang, Zhou Lei, et al. FPGA-based multiple-axis stepper motor controller. Electric Machines and Control, 2012, 16(3): 78-82 https://www.cnki.com.cn/Article/CJFDTOTAL-DJKZ201203014.htm
[5]	程树康, 刘宝廷, 宋立伟, 等. 步进电动机及其驱动控制系统[M]. 哈尔滨: 哈尔滨工业大学出版社, 2007: 1-2. Chen Shukang, Liu Bao-ting, Song Liwei, et al. Stepper and its drive and control system. Harbin: Harbin Institute of Technology Press, 2007: 1-2
[6]	李志强, 王旭光. 基于TMS320LF2407DSP的直线步进电机速度控制的研究[J]. 伺服控制, 2011, 8(3): 34-37. https://www.cnki.com.cn/Article/CJFDTOTAL-JXKF201002010.htm Li Zhiqiang, Wang Xuguang. Research on speed control of line step motor based on TMS320LF2407DSP. Servo Control, 2011, 8(3): 34-37 https://www.cnki.com.cn/Article/CJFDTOTAL-JXKF201002010.htm
[7]	黄楚芳, 陈鸿. 步进电机加减速控制器的设计[J]. 山西电子技术, 2009, 37(1): 30-31. https://www.cnki.com.cn/Article/CJFDTOTAL-SXDS200901014.htm Huang Chufang, Chen Hong. The design and implementation of acceleration/deceleration controller of stepper motor. Shanxi Electronic Technology, 2009, 37(1): 30-31 https://www.cnki.com.cn/Article/CJFDTOTAL-SXDS200901014.htm
[8]	Boudjit K. Real-time digital control using DSP of a multiple motors system[J]. Journal of Electrical Systems, 2009, 10(1): 30-35.
[9]	Allegro Microsystems Inc. A3953: Full-bridge PWM motor driver[EB/OL]. Allegro Microsystems Inc, 2000. http://www.allegromicro.com/en/Products/Part_Numbers/3953/3953.pdf.
[10]	周传明, 刘国治, 刘永贵, 等. 高功率微波源[M]. 北京: 原子能出版社, 2007. Zhou Chuanming, Liu Guozhi, Liu Yonggui, et al. High-power microwave sources. Beijing: Atomic Energy Press, 2007

Relative Articles

[1]	Xu Rui, Wang Bangji, Liu Qingxiang, Wang Dong, Weng Hong. Position process control system of miniature brushless DC motor[J]. High Power Laser and Particle Beams, 2022, 34(4): 043001. doi: 10.11884/HPLPB202234.210162
[2]	Zhou Lei, Wang Bangji, Liu Qingxiang, Li Xiangqiang, Zhang Jianqiong. Multi-axis DC motor controller for phased array antenna applications implemented on FPGA[J]. High Power Laser and Particle Beams, 2018, 30(1): 013001. doi: 10.11884/HPLPB201830.170188
[3]	Zhang Hongwei, Liu Chaoyang, Yu Zhihua, Liu Honghua. Design of high power self-rotating beam scanning antenna with no phase shifter[J]. High Power Laser and Particle Beams, 2018, 30(7): 073008. doi: 10.11884/HPLPB201830.170531
[4]	Chen Gang, Wen Chunmei, Li Yuhui. Calibration and installation of a permanent magnet phase shifter based on nonlinear parameter estimation[J]. High Power Laser and Particle Beams, 2018, 30(12): 125106. doi: 10.11884/HPLPB201830.180205
[5]	Huang Zijiang, He Hengxiang, Jiang Zhongming, Liu Pan, Zhang Qiang, Huang Kai. Design of high-precision timing control system in combined pulse laser[J]. High Power Laser and Particle Beams, 2016, 28(12): 125005. doi: 10.11884/HPLPB201628.160157
[6]	Wan Rongxin, Li Xiangqiang, Liu Qingxiang, Wang Bangji, Zhou Lei. Design of IP core for DC micromotor controller based on FPGA[J]. High Power Laser and Particle Beams, 2016, 28(03): 033011. doi: 10.11884/HPLPB201628.033011
[7]	Deng Guangjian, Huang Wenhua, Li Jiawei, Shao Hao, Ba Tao, Zhang Zhiqiang. High power ferrite phase shifter based on structure of waveguide in parallel[J]. High Power Laser and Particle Beams, 2016, 28(08): 083006. doi: 10.11884/HPLPB201628.151095
[8]	Yan Fabao, Su Yanrui, Yang Hong, Liu Jianxin. High-precision optical platform focusing control system[J]. High Power Laser and Particle Beams, 2015, 27(09): 091009. doi: 10.11884/HPLPB201527.091009
[9]	Zhang Dewei, Li Wenchao, Zhou Dongfang, Wang Yongfei, Deng Hailin. Design of Ka-band reflection-type analog electrically controlled phase shifter[J]. High Power Laser and Particle Beams, 2015, 27(05): 053001. doi: 10.11884/HPLPB201527.053001
[10]	Li Guohui, Yang Yuan, He Zhongwu, Xiang Rujian, Wu Jing, Xu Honglai, Yan Hong, Lu Fei, Hu Ping. High accuracy optical axis stable control in beam system of four lasers[J]. High Power Laser and Particle Beams, 2014, 26(03): 031009. doi: 10.3788/HPLPB201426.031009
[11]	Ma Jun, Wang Honggang, Du Guangxing, Qian Baoliang. Preliminary design of TM₁₁-TE₁₀ mode converter in rectangular waveguide[J]. High Power Laser and Particle Beams, 2014, 26(06): 063004. doi: 10.11884/HPLPB201426.063004
[12]	Zhou Yifei, Liu Qingxiang, Li Xiangqiang, Wang Bangji, Zhou Lei, Li Wei. Simulation of helical antenna stepper motor control system and optimization of running curve[J]. High Power Laser and Particle Beams, 2014, 26(06): 063020. doi: 10.11884/HPLPB201426.063020
[13]	Du Kai, Li Guo, Tong Weichao, Huang Yanhua, Tang Yongjian. Accuracy control of capsule micro holes in fast ignition based on single point diamond turning[J]. High Power Laser and Particle Beams, 2013, 25(12): 3225-3229. doi: 3225
[14]	Su Rongtao, Zhou Pu, Wang Xiaolin, Han Kai, Xu Xiaojun. 光纤激光相干合成高速高精度相位控制器[J]. High Power Laser and Particle Beams, 2012, 24(06): 1290-1294. doi: 10.3788/HPLPB20122406.1290
[15]	lu hui, zhang lijun, zheng zhanqi, zhang yiheng, leng yongqing, liao xianhua. Fiber-based vector-sum microwave photonic phase shifter[J]. High Power Laser and Particle Beams, 2011, 23(12): 12-13.
[16]	li xiao, sun hong, qiu yingwei, shen sirong, tang jingyu. Digital RF phase control loop at rapid cycling synchrotron of China spallation neutron source[J]. High Power Laser and Particle Beams, 2011, 23(02): 0- .
[17]	wang bangji, liu qingxiang, zhang zhengquan, li xiangqiang, zhang jianqiong. Design of motor control system for mechanical phased array antenna[J]. High Power Laser and Particle Beams, 2011, 23(11): 0- .
[18]	zhou lei, liu qingxiang, li xiangqiang, wang bangji, yu yi, zhang jianqiong, zhang yanrong, li hanbing. Design of stepping motor control IP core for array antenna successive scanning[J]. High Power Laser and Particle Beams, 2011, 23(11): 0- .

Supplements(0)

Cited By

Cited by

Periodical cited type(2)

1.	许睿，王邦继，刘庆想，王东，翁红. 微型无刷直流电机位置系统的过程控制. 强激光与粒子束. 2022(04): 47-53 . 本站查看
2.	袁敏，曹妍，王媛媛. 光场非等距双向传播的实时信号处理系统. 激光杂志. 2021(04): 192-196 .