Research on non-fixed ring belt double-side polishing technology

He Manze; Zhou Peifan; Huang Ying

doi:10.11884/HPLPB201830.180358

Volume 30 Issue 12

Dec. 2018

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2018 > 30(12): 122003

He Manze, Zhou Peifan, Huang Ying. Research on non-fixed ring belt double-side polishing technology[J]. High Power Laser and Particle Beams, 2018, 30: 122003. doi: 10.11884/HPLPB201830.180358

Citation:

He Manze, Zhou Peifan, Huang Ying. Research on non-fixed ring belt double-side polishing technology[J]. High Power Laser and Particle Beams, 2018, 30: 122003. doi: 10.11884/HPLPB201830.180358

He Manze, Zhou Peifan, Huang Ying. Research on non-fixed ring belt double-side polishing technology[J]. High Power Laser and Particle Beams, 2018, 30: 122003. doi: 10.11884/HPLPB201830.180358

Citation:

He Manze, Zhou Peifan, Huang Ying. Research on non-fixed ring belt double-side polishing technology[J]. High Power Laser and Particle Beams, 2018, 30: 122003. doi: 10.11884/HPLPB201830.180358

PDF( 6638 KB)

Research on non-fixed ring belt double-side polishing technology

doi: 10.11884/HPLPB201830.180358

1.
Research Center of Laser Fusion, CAEP, P. O. Box 919-988, Mianyang 621900, China
2.
Fine Optical Engineering Research Center, Chengdu 610041, China

Received Date: 2018-10-17
Rev Recd Date: 2018-11-29
Publish Date: 2018-12-15

Abstract

Abstract

We have proposed a method of non-fixed ring belt random double-side polishing based on the technology of translational pendulum. A device based on translation and pendulum out of limits to fixed ring belt was designed. The iterations were carried out by random motion which solved the periodic trajectory problem in the process of fixed ring belt polishing. We developed a device coupling with double-side polishing based on active translation and pendulum. We have achieved stable control of the large-aperture ultra-thin component surface shape in the random motion superposition by optimizing the combination of movement mode. Compared with planetary double-side polishing, our method not only has better surface shape, but also has no obvious periodic processing trace. The method can be applied to batch production of ultra-thin parts with special requirements for laser damage threshold of surface.
- non-fixed ring belt random polishing,
- double-side polishing,
- large-aperture ultra-thin component,
- laser damage threshold

FullText(HTML)

References(10)

References

[1]	乔战峰, 卢兴强, 赵东峰, 等. 神光Ⅱ升级装置终端光学组件的排布设计[J]. 中国激光, 2008, 35: 1328-1332. doi: 10.3321/j.issn:0258-7025.2008.09.006 Qiao Zhanfeng, Lu Xingqiang, Zhao Dongfeng, et al. Arrangement design of the final optics assembly for SG-Ⅱ upgrading laser. Chin J Laser, 2008, 35: 1328-1332 doi: 10.3321/j.issn:0258-7025.2008.09.006
[2]	Peng H, Zhang X M, Wei X, et al. Status of the SG-Ⅲ solid state laser project[C]//Proc of SPIE. 1999, 3492: 25-33.
[3]	蒋勇. 熔石英光学元件表面损伤修复的理论和实验研究[D]. 成都: 电子科技大学, 2012: 173-178. Jiang Yong. Theoretical and experimental study on surface damage repaire of fused silca optics. Chengdu: University of Electronic Science and Technology of China, 2012: 173-178
[4]	章春来, 刘春明, 向霞, 等. 裂纹或气泡对熔石英损伤修复坑场调制的近场模拟[J]. 物理学报, 2012, 61(12): 319-330. https://www.cnki.com.cn/Article/CJFDTOTAL-WLXB201212042.htm Zhang Chunlai, Liu Chunming, Xiang Xia, et al. Near-field modulated simulation of repaired site contained crack or bubble in fused silica subsurface. Acta Physica Sinica, 2012, 61(12): 319-330 https://www.cnki.com.cn/Article/CJFDTOTAL-WLXB201212042.htm
[5]	Bass I L, Draggoo V G, Guss G M, et al. Mitigation of laser damage growth in fused silica NIF optics with a galvanometer scanned CO₂ laser[C]//Proc of SPIE. 2006, 62612A.
[6]	Campbell J H, Hawley-Fedder R A, Stolz C J, et al. NIF optical materials and fabrication technologies: An overview[C]//Proc of SPIE. 2004, 5341: 84-101.
[7]	Preston F W. Class technology[J]. Journal of the Society of Class Technology, 1927, 11(24): 277-281.
[8]	Zhao Y W, Chang L A. Micro-contact and wear model for chemical mechanical polishing of silicon wafer[J]. Wear, 2002, 252(3/4): 220-226.
[9]	Fu G H, Chandra A, Guha S A. Plasticity-based model of material removal in chemical-mechanical polishing(CMP)[J]. IEEE Trans Semiconductor Manufacturing, 2001, 14(4): 1698-1701.
[10]	Runnrls S R, Eyman L M. Tribology analysis of chemical-mechanical polishing[J]. Electrochem SOC, 1994, 14(6): 69-71. https://ui.adsabs.harvard.edu/abs/1994JElS..141.1698R/abstract#:~:text=%EE%80%80Tribology%20analysis%20of%20chemical-mechanical%20polishing%EE%80%81.%20To%20better%20understand,considerable%20depending%20on%20whether%20or%20not%20the%20