Citation: | Yang Hao, Yan Eryan, Zheng Qianglin, et al. A microwave plasma system with quasi optical focusing reflector[J]. High Power Laser and Particle Beams, 2019, 31: 053002. doi: 10.11884/HPLPB201931.180350 |
[1] |
Robert J B, Edi S. 高功率微波源与技术[M]. 北京: 清华大学出版社, 2005.
Robert J B, Edi S. High-power microwave sources and technology. Beijing: Tsinghua University Press, 2005
|
[2] |
Andrei V G, Victor L G. Application of high-power microwaves[M]. Artech House, 1994.
|
[3] |
Yan Eryan, Qiu Feng, Yang Hao, et al. Research of HPM plasma breakdown characteristics[C]//APCPST2016.2016.
|
[4] |
刘繁, 汪建华, 王秋良, 等. 常压微波等离子体炬装置的模拟与设计[J]. 强激光与粒子束, 2011, 23(6): 1504-1508. http://www.hplpb.com.cn/article/id/5279
Liu Fan, Wang Jianhua, Wang Qiuliang, et al. Numerical modeling and design of atmospheric pressure microwave plasma jet. High Power Laser and Particle Beams, 2011, 23(6): 1504-1508 http://www.hplpb.com.cn/article/id/5279
|
[5] |
刘亮, 张贵新, 朱志杰, 等. 一种大气微波环形波导等离子体设备[J]. 强激光与粒子束, 2007, 19(7): 1501-1506. http://www.hplpb.com.cn/article/id/3452
Liu Liang, Zhang Guixin, Zhu Zhijie, et al. Atmospheric pressure microwave plasma system with ring waveguide. High Power Laser and Particle Beams, 2007, 19(7): 1501-1506 http://www.hplpb.com.cn/article/id/3452
|
[6] |
周传明, 刘国治, 刘永贵, 等. 高功率微波源[M]. 北京: 原子能出版社, 2007.
Zhou Chuanming, Liu Guozhi, Liu Yonggui, et al. High-power microwave sources. Beijing: Atomic Energy Press, 2007
|
[7] |
Woo W, DeGroot J S. Microwave absorption and plasma heating due to microwave breakdown in the atmosphere[J]. Phys Fluids, 1984, 27(2): 475-487. doi: 10.1063/1.864645
|
[8] |
Vidmar R J. On the use of atmospheric pressure plasmas as electromagnetic reflectors and absorbers[J]. IEEE Trans Plasma Sci, 1990, 18(4): 733-741. doi: 10.1109/27.57528
|
[9] |
邱风, 闫二艳, 孟凡宝, 等. 开放空间等离子体对微波传输影响的模拟研究[J]. 强激光与粒子束, 2015, 27: 103234. doi: 10.11884/HPLPB201527.103234
Qiu Feng, Yan Eryan, Meng Fanbao, et al. Simulation research on transmission of microwave by plasmas at open space. High Power Laser and Particle Beams, 2015, 27: 103234 doi: 10.11884/HPLPB201527.103234
|
[10] |
Zhou Qianhong, Dong Zhiwei. Theoretical study on the energy loss induced by electron collisions in weakly ionized air plasma[J]. Acta Physica Sinica, 2013, 62: 205201. doi: 10.7498/aps.62.205201
|
[11] |
Liao B, Zhang S J, Na Z, et al. Study on low-power microwave plasma source based on microstrip split-ring resonator[J]. Journal of Shanghai Jiaotong University, 2009, 43(3): 372-376. doi: 10.3321/j.issn:1006-2467.2009.03.008
|
[12] |
Qiu F, Yan E, Meng F, et al. Analysis based on global model of nitrogen plasma produced by pulsed microwave at low pressure[J]. Physics of Plasmas, 2015, 22: 073506. doi: 10.1063/1.4926588
|
[13] |
Yang W, Zhou Q, Dong Z. Simulation study on nitrogen vibrational and translational temperature in air breakdown plasma generated by 110 GHz focused microwave pulse[J]. Physics of Plasmas, 2017, 24: 013111. doi: 10.1063/1.4974161
|
[1] | Lu Feng, Wang Zhenzhong, Huang Xuepeng, Lei Pengli. Modal analysis and mid-spatial-frequency errors suppression of 6-DOF bonnet polishing robot[J]. High Power Laser and Particle Beams, 2022, 34(11): 119001. doi: 10.11884/HPLPB202234.220013 |
[2] | Xiao Jing, Wang Haiyang, Xie Linshen, Cheng Le, Sun Chuyu, Shi Ling. Adaptability analysis and optimization design of modular Marx generator in mechanical environment[J]. High Power Laser and Particle Beams, 2022, 34(4): 045001. doi: 10.11884/HPLPB202234.210344 |
[3] | Wang Keying, Fan Xuanhua, Chen Xueqian, Niu Hongpan. Random vibration response analysis of Shenguang laser facility component based on PANDA platform[J]. High Power Laser and Particle Beams, 2020, 32(1): 011021. doi: 10.11884/HPLPB202032.190269 |
[4] | Liu Zhiyong, Zeng Herong, Wang Shaohua, Guo haibing, Ma jimin. Finite element analysis of subcritical energy blanket for uranium-based fusion-fission hybrid reactor[J]. High Power Laser and Particle Beams, 2018, 30(3): 036001. doi: 10.11884/HPLPB201830.170099 |
[5] | Hu Jie, Fan Xuanhua, Chen Xueqian. Simplified modeling of opto-mechanical structure based on dynamic stiffness equivalence[J]. High Power Laser and Particle Beams, 2017, 29(09): 092002. doi: 10.11884/HPLPB201729.170103 |
[6] | Gao Yang, Zhou Bin, He Yi, He Wanjing. Modeling and simulation on film bulk acoustic resonator with silicon oxide temperature-compensated layer[J]. High Power Laser and Particle Beams, 2015, 27(01): 014103. doi: 10.11884/HPLPB201527.014103 |
[7] | Liu Zhiyong, Li Zhenghong, Huang Hongwen, Zeng Herong, Wang Shaohua. Finite element analysis of ITER magnet support structure[J]. High Power Laser and Particle Beams, 2015, 27(01): 016013. doi: 10.11884/HPLPB201527.016013 |
[8] | Zhang Jianghua, Yang Hanwu, Zhang Hua, Tian Xiwen, Liang Bo, Li Song. Constant current charging process of MV-level Marx generator[J]. High Power Laser and Particle Beams, 2012, 24(04): 903-906. doi: 10.3788/HPLPB20122404.0903 |
[9] | jiang zhiqiang, du hanwen. Mechanical analysis and optimization for taper mechanism of in-vacuum undulator[J]. High Power Laser and Particle Beams, 2011, 23(04): 0- . |
[10] | chen xueqian, feng jiaquan, xu yuanli. Stability reallocation of large solid state laser based on finite element analysis[J]. High Power Laser and Particle Beams, 2010, 22(05): 0- . |
[11] | chen ming-jun, pang qi-long, liu xin-yan. Finite element analysis on influence of micro-nano machined surface impurity on optical performance of crystal[J]. High Power Laser and Particle Beams, 2008, 20(07): 0- . |
[12] | xu gang, zhang jin-qi, zhang xian-fu, yang zhou-bing, meng fan-bao, tang chuan-xiang. Electrical insulation design and numerical simulation analysis of 1 MV compact repetitive Marx generator[J]. High Power Laser and Particle Beams, 2008, 20(11): 0- . |
[13] | zhang li-sha, xu hong. Influence of oxygen partial pressure on HfO2 residual stresses and its finite element analysis[J]. High Power Laser and Particle Beams, 2008, 20(06): 0- . |
[14] | hou li-fei, yi rong-qing, du hua-bing, liu shen-ye. Structure design and finite-element analysis of multilayer-mirror soft X-ray energy spectrometer[J]. High Power Laser and Particle Beams, 2008, 20(08): 0- . |
[15] | huang hong-bin, li jing-zhen, gong xiang-dong, sun feng-shan, ai yue-xia, he tie-feng. Modal analysis of rotating mirror clipped by the elastic bearings for ultra-high speed photography[J]. High Power Laser and Particle Beams, 2007, 19(02): 0- . |
[16] | zhang jun-wei, feng bin, zhou yi, wang shi-long, xiang yong. Finite element analysis on ambient thermal stability of large aperture optical element[J]. High Power Laser and Particle Beams, 2007, 19(08): 0- . |
[17] | wang jin-shan, zhu yu-qun, jiang chao. Finite element analysis of heat transfer in hollow micro-sphere filled with ICF fuel[J]. High Power Laser and Particle Beams, 2006, 18(10): 0- . |
[18] | cao ding-xiang, zheng wan-guo, he shao-bo, yuan xiao-dong, yu hai-wu, xu mei-jian, cai zhen. Finite element analysis on thermal effect of heat capacity laser disk[J]. High Power Laser and Particle Beams, 2006, 18(09): 0- . |
[19] | qi wen-zong, huang wei, zhang bin, cai bang-wei, xiong sheng-ming, . Finite element analysis of thermal distortion of infrared CW laser reflectors[J]. High Power Laser and Particle Beams, 2004, 16(08): 0- . |
[20] | yu de-li, sang feng-ting, jin yu-qi, sun yi-zhu. Finite Element Analysis of the Mirror in High-energy Density Laser Resonator[J]. High Power Laser and Particle Beams, 2001, 13(02): 0- . |
1. | 吴刚,贾伟,王海洋,谢霖燊,陈志强,郭帆,吴伟,冯寒亮. 高空核电磁脉冲模拟器研制进展. 中国科学:物理学 力学 天文学. 2023(07): 97-109 . ![]() | |
2. | 张超,陈焕红,刘雪峰,石志成,张艾. 双级升压高速电光调Q驱动电路设计. 航天返回与遥感. 2023(05): 65-71 . ![]() |