Upgrade of low level RF system based on Micro Telecom Computing Architecture (MTCA) for HLS-II LINAC

Ren Tianqi; Tang Leilei; Zhou Zeran

doi:10.11884/HPLPB202032.200080

Volume 32 Issue 8

Aug. 2020

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > High Power Laser and Particle Beams > 2020 > 32(8): 084006

Ren Tianqi, Tang Leilei, Zhou Zeran. Upgrade of low level RF system based on Micro Telecom Computing Architecture (MTCA) for HLS-II LINAC[J]. High Power Laser and Particle Beams, 2020, 32: 084006. doi: 10.11884/HPLPB202032.200080

Citation:

Ren Tianqi, Tang Leilei, Zhou Zeran. Upgrade of low level RF system based on Micro Telecom Computing Architecture (MTCA) for HLS-II LINAC[J]. High Power Laser and Particle Beams, 2020, 32: 084006. doi: 10.11884/HPLPB202032.200080

Citation:

PDF( 901 KB)

Upgrade of low level RF system based on Micro Telecom Computing Architecture (MTCA) for HLS-II LINAC

doi: 10.11884/HPLPB202032.200080

National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei 230026, China

Received Date: 2020-03-27
Rev Recd Date: 2020-06-05
Publish Date: 2020-08-13

Abstract

Abstract

The performance of Hefei Light Source II (HLS-II) has improved a lot after major maintenance and reconstruction. To further provide continuous and stable light, the RF system of the HLS-II LINAC needs to be upgraded for top-off mode. It is required that the RF power source have long-time stability and reliability, but the old analog low level RF system(LLRF) can’t meet the requirement. Hence a digital low level RF control system based on Micro Telecom Computing Architecture(MTCA) is designed and implemented to control the amplitude and phase of the RF power source. This system is composed of digital board cards based on FPGA, RF board cards, MTCA chassis and a frequency synthesis system. It works at 2856 MHz of S band, with phase and amplitude stability up to 0.2° and 0.04% respectively, which meets the top-off mode requirement of 0.25° RMS phase jitter of the digital low-level RF system in the HLS-II LINAC.
- HLS-II,
- LINAC,
- low level RF system,
- FPGA,
- MTCA

FullText(HTML)

References(10)

References

[1]	Bai Zhenghe, Wang Lin, Jia Qika, et al. Lattice optimization for the HLS-Ⅱ storage ring[J]. Chinese Physics C, 2013, 37: 017001. doi: 10.1088/1674-1137/37/1/017001
[2]	Bai Zhenghe, Wang Lin, Jia Qika, et al. Lattice study for the HLS-Ⅱ storage ring[J]. Chinese Physics C, 2013, 37: 047004. doi: 10.1088/1674-1137/37/4/047004
[3]	Zhang Hao, Li Weimin, Feng Guangyao, et al. The magnet design for the HLS storage ring upgrade project[J]. Chinese Physics C, 2012, 36: 91-95. doi: 10.1088/1674-1137/36/1/016
[4]	Wang Lin, Li Weimin, Feng Guangyao, et al. The upgrade project of Hefei light source (HLS)[C]//Proceedings of the IPAC. 2010: 2588-2590.
[5]	PICMG. MicroTCA overview[EB/OL]. https://www.picmg.org/openstandards/microtca/.
[6]	Wibowo S B, Matsumoto T, Michizono S, et al. Digital low level RF control system for the International Linear Collider[J]. Physical Review Accelerators and Beams, 2018, 21: 082004. doi: 10.1103/PhysRevAccelBeams.21.082004
[7]	Pfeiffer S. LLRF controls and feedback: free-electron lasers and energy recovery linacs[C]//Proceedings of the CAS-CERN Accelerator School: Free Electron Lasers and Energy Recovery Linacs.2018.
[8]	DWC8VM1. MTCA.4 Downconverter[EB/OL]. https://www.struck.de/dwc8vm1.html.
[9]	SIS8300-L. MTCA.4 Digitizer[EB/OL]. https://www.struck.de/sis8300-l2.html.
[10]	Song Yifan, Li chuan, Xuan Ke, et al. Automatic data archiving and visualization at HLS-Ⅱ[J]. Nuclear Science and Techniques, 2018, 29: 129. doi: 10.1007/s41365-018-0461-6