Citation: | Shao Zhuoxia, Gao Hui, Zhang Haiyan, et al. Recent development of beam orbit fast corrector power supply[J]. High Power Laser and Particle Beams, 2023, 35: 024001. doi: 10.11884/HPLPB202335.220223 |
The deviation of the beam orbit can be quickly corrected by the fast corrector power supply, which improves the reliability of the operation of the synchrotron radiation light source. With the further improvement of the quality of the fourth-generation Diffraction-Limited Storage Ring (DLSR) light source, the Fast Orbit FeedBack (FOFB) system places higher requirements on the performance of the corrector power supply to achieve the stability of the beam orbit. In this paper, the current research achievements of beam orbit fast corrector power supply in international fourth-generation synchrotron radiation light sources are divided into two categories: linear power supply and switching power supply. According to the requirements of the FOFB system in the advanced synchrotron radiation light source for the fast corrector power supply, the topology, control strategy and performance parameters of each scheme are briefly compared and analyzed.
[1] |
Cai Yunhai, Bane K, Hettel R, et al. Ultimate storage ring based on fourth-order geometric achromats[J]. Physical Review Special Topics—Accelerators and Beams, 2012, 15: 054002. doi: 10.1103/PhysRevSTAB.15.054002
|
[2] |
Leemann S C, Liu S, Hexemer A, et al. Demonstration of machine learning-based model-independent stabilization of source properties in synchrotron light sources[J]. Physical Review Letters, 2019, 123: 194801. doi: 10.1103/PhysRevLett.123.194801
|
[3] |
Hubert N, Cassinari L, Denard J C, et al. Global orbit feedback systems down to DC using fast and slow correctors[C]//Proceedings of DIPAC. 2009: 27-31.
|
[4] |
Kempf I, Goulart P J, Duncan S R, et al. Symmetry exploitation in orbit feedback systems of synchrotrons for computational efficiency[J]. IEEE Transactions on Nuclear Science, 2021, 68(3): 258-269. doi: 10.1109/TNS.2021.3052553
|
[5] |
Shao Zhuoxia, Zhang Haiyan, Gao Hui, et al. A fast-response and high-stability power supply for a corrector magnet in HALS[J]. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2020, 8(3): 2293-2301. doi: 10.1109/JESTPE.2019.2932765
|
[6] |
Giachero A F, Russo L M, Tavares D O. Fast orbit corrector power supply in MTCA. 4 form factor for Sirius light source[C]//Proceedings of MicroTCA Workshop. 2021.
|
[7] |
Liu Peng, Wang Xu, Long Fengli. Fast corrector power supply design for HEPS[J]. Radiation Detection Technology and Methods, 2020, 4(1): 56-62. doi: 10.1007/s41605-019-0149-4
|
[8] |
Shao Zhuoxia, Liu Peng, Zhang Haiyan, et al. Research on a multilevel corrector magnet power supply based on a buck cascade circuit[J]. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2020, 953: 163083. doi: 10.1016/j.nima.2019.163083
|
[9] |
Braun, H., Garvey, T., Jörg, M., et al. SLS2.0 storage ring technical design report, chapter 2.3: power supply types for SLS 2.0 [R]. Report No.: 21-02, 2017: 91-95.
|
[10] |
Song B M, Wang Ju. Mathematical modeling and analysis of a wide bandwidth bipolar power supply for the fast correctors in the APS upgrade controller[C]//Proceedings of the 6th International Particle Accelerator Conference. 2015: 3264-3266.
|
[11] |
Navarro D, Lucía Ó, Barragán L A, et al. Synchronous FPGA-based high-resolution implementations of digital pulse-width modulators[J]. IEEE Transactions on Power Electronics, 2012, 27(5): 2515-2525. doi: 10.1109/TPEL.2011.2173702
|