Influence of vacuum baking O-rings on optical properties of laser system

Niu Longfei; You Hui; Lü Haibing; Jiang Yilan; Zhou Guorui; Li Changpeng; Huang Lin; Huang Jin; Miao Xinxiang; Yao Caizhen; Jiang Xiaodong

doi:10.11884/HPLPB202335.220390

Volume 35 Issue 6

May 2023

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2023 > 35(6): 061004

Niu Longfei, You Hui, Lü Haibing, et al. Influence of vacuum baking O-rings on optical properties of laser system[J]. High Power Laser and Particle Beams, 2023, 35: 061004. doi: 10.11884/HPLPB202335.220390

Citation:

Niu Longfei, You Hui, Lü Haibing, et al. Influence of vacuum baking O-rings on optical properties of laser system[J]. High Power Laser and Particle Beams, 2023, 35: 061004. doi: 10.11884/HPLPB202335.220390

Citation:

PDF( 941 KB)

Influence of vacuum baking O-rings on optical properties of laser system

doi: 10.11884/HPLPB202335.220390

Laser Fusion Research Center, CAEP, Mianyang 621900, China

Received Date: 2022-12-28
Accepted Date: 2023-03-07
Rev Recd Date: 2023-03-07

Available Online: 2023-03-15

Publish Date: 2023-05-06

Abstract

Abstract

The outgassing of non-metallic materials in optical vacuum system will produce molecular contamination, which will lead to the decrease of transmittance of optical elements, and then aggravate laser-induced damage and reduce the load capacity of high-power laser facilities. In this paper, it is proposed to optimize the sealing materials in the laser environment, and carry out the experimental study of thermal vacuum baking. The results show that fluoroelastomer 246 has low outgassing, and temperature has great influence on the degassing effect of the material, and the vacuum baking degassing of the sealing ring has little influence on the optical characteristics. Compared with the sealing ring without vacuum baking, the average UV transmittance change decreased by 1 order of magnitude, and the average damage density decreased by 56%. This technology can be used in high-power laser facilities for precision cleaning and other optical cleaning systems.
- outgassing contamination,
- non-metallic materials,
- thermal vacuum baking,
- relative quality

FullText(HTML)

References(12)

References

[1]	Wang Xiaodong, Shen Jun. A review of contamination-resistant antireflective sol–gel coatings[J]. Journal of Sol-Gel Science and Technology, 2012, 61(1): 206-212. doi: 10.1007/s10971-011-2615-4
[2]	Cui Yun, Zhao Yuanan, Yu Hua, et al. Impact of organic contamination on laser-induced damage threshold of high reflectance coatings in vacuum[J]. Applied Surface Science, 2008, 254(18): 5990-5993. doi: 10.1016/j.apsusc.2008.03.185
[3]	朱剑涛, 刘晨, 刘天雄. 卫星真空烘烤试验方案及验证[J]. 航天器环境工程, 2018, 35(1):76-81 doi: 10.3969/j.issn.1673-1379.2018.01.014 Zhu Jiantao, Liu Chen, Liu Tianxiong. The satellite vacuum bakeout test scheme with validation[J]. Spacecraft Environment Engineering, 2018, 35(1): 76-81 doi: 10.3969/j.issn.1673-1379.2018.01.014
[4]	于钱, 臧卫国, 杨晓宁, 等. 硅橡胶电缆材料真空烘烤除气参数实验分析方法[J]. 环境技术, 2015, 33(3):25-28,53 doi: 10.3969/j.issn.1004-7204.2015.03.009 Yu Qian, Zang Weiguo, Yang Xiaoning, et al. Test method study of silicone rubber cable baking outgassing parameter in vacuum environment[J]. Environmental Technology, 2015, 33(3): 25-28,53 doi: 10.3969/j.issn.1004-7204.2015.03.009
[5]	袁翠萍, 张辰华, 赵如琳, 等. 航天器电缆网热真空烘烤特性研究[J]. 电子工艺技术, 2018, 39(1):37-39,42 doi: 10.14176/j.issn.1001-3474.2018.01.011 Yuan Cuiping, Zhang Chenhua, Zhao Rulin, et al. Characteristic study on thermal vacuum baking test of spacecraft harness[J]. Electronics Process Technology, 2018, 39(1): 37-39,42 doi: 10.14176/j.issn.1001-3474.2018.01.011
[6]	焦子龙, 姜利祥, 孙继鹏, 等. 空间光学系统真空热试验污染控制经验综述[J]. 航天器环境工程, 2015, 32(4):445-450 doi: 10.3969/j.issn.1673-1379.2015.04.020 Jiao Zilong, Jiang Lixiang, Sun Jipeng, et al. Overview of contamination controls for space-based optical systems in thermal vacuum tests[J]. Spacecraft Environment Engineering, 2015, 32(4): 445-450 doi: 10.3969/j.issn.1673-1379.2015.04.020
[7]	焦子龙, 姜利祥, 孙继鹏, 等. 星载激光雷达系统污染增强损伤效应及防护试验研究[J]. 航天器环境工程, 2017, 34(4):419-423 doi: 10.3969/j.issn.1673-1379.2017.04.014 Jiao Zilong, Jiang Lixiang, Sun Jipeng, et al. Tests for contamination enhanced and laser-induced damage in spaceborne lidar system and its prevention[J]. Spacecraft Environment Engineering, 2017, 34(4): 419-423 doi: 10.3969/j.issn.1673-1379.2017.04.014
[8]	张雪芹, 尚忠, 于建波. 密封微电子器件真空烘烤工艺研究[J]. 电子与封装, 2017, 17(1):6-9 doi: 10.16257/j.cnki.1681-1070.2017.0002 Zhang Xueqin, Shang Zhong, Yu Jianbo. Studies of vacuum bakeout process for hermetic microelectronic devices[J]. Electronics & Packaging, 2017, 17(1): 6-9 doi: 10.16257/j.cnki.1681-1070.2017.0002
[9]	代彦伟, 肖梅, 张晓兵, 等. 基于四极质谱仪O形氟橡胶圈的放气研究[J]. 真空与低温, 2016, 22(3):170-172 doi: 10.3969/j.issn.1006-7086.2016.03.011 Dai Yanwei, Xiao Mei, Zhang Xiaobing, et al. The deflated research on Viton O-ring based on using quadrupole mass spectrometer[J]. Vacuum & Cryogenics, 2016, 22(3): 170-172 doi: 10.3969/j.issn.1006-7086.2016.03.011
[10]	Pryatel J A, Gourdin W H, Frieders S C, et al. Cleaning practices and facilities for the national ignition facility (NIF)[C]//Proceedings of SPIE 9237, Laser-Induced Damage in Optical Materials. 2014: 92372H.
[11]	Pryatel J A, Gourdin W H, Hampton G J, et al. Qualification of materials for applications in high fluence lasers[C]//Proceedings of SPIE 6403, Laser-Induced Damage in Optical Materials. 2007: 640329.
[12]	QJ 1558B-2016, 真空条件下材料挥发性能测试方法[S] QJ 1558B-2016, Test method for materials outgassing performance in vacuum[S]