Development of high-power pulse inductor for vertical field power supply of TT-1 device

Fan Wendi; Guan Rui; Zhang Jian; Huang Yiyun

doi:10.11884/HPLPB202335.220393

Volume 35 Issue 6

May 2023

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2023 > 35(6): 065006

Fan Wendi, Guan Rui, Zhang Jian, et al. Development of high-power pulse inductor for vertical field power supply of TT-1 device[J]. High Power Laser and Particle Beams, 2023, 35: 065006. doi: 10.11884/HPLPB202335.220393

Citation:

Fan Wendi, Guan Rui, Zhang Jian, et al. Development of high-power pulse inductor for vertical field power supply of TT-1 device[J]. High Power Laser and Particle Beams, 2023, 35: 065006. doi: 10.11884/HPLPB202335.220393

Citation:

PDF( 20439 KB)

Development of high-power pulse inductor for vertical field power supply of TT-1 device

doi: 10.11884/HPLPB202335.220393

Fan Wendi^{1, 2
,},
Guan Rui^{2, 3},
Zhang Jian^{2, 3},
Huang Yiyun^{2, 3
,
,}

1.
Institute of Physical Science and Information Technology, Anhui University, Hefei 230039, China
2.
Institute of Plasma Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei 230031, China
3.
Science Island Branch, University of Science and Technology of China, Hefei 230026, China

Received Date: 2021-11-02
Accepted Date: 2023-03-28
Rev Recd Date: 2023-03-28

Available Online: 2023-04-03

Publish Date: 2023-05-06

Abstract

Abstract

To meet the demand of plasma discharge, pulse inductor should be connected to the vertical field power supply to change the output current parameters. To satisfy the need of the output current of the vertical field power supply of the TT-1 device, pulse inductor was designed and developed. According to the operating conditions and parameters of the inductor, the detailed mathematical analysis and structural design were carried out by the induction coefficient method and cumulative temperature rise method. Based on the theoretical design, an Ansys simulation model was established to study the magnetic field and temperature rise of the inductor. Finally, the inductor was developed. According to the bridge measurement and experimental waveform, the actual inductance parameters agree well with the theoretical analysis. The experiment of fatigue and temperature was carried out on the inductor under the condition of high current to verify the reliability of the theoretical design.
- TT-1 device,
- pulse inductor,
- vertical field power supply,
- Ansys simulation

FullText(HTML)

References(14)

References

[1]	管锐, 周宇, 高宗球, 等. HT-6M托卡马克加热场脉冲电源的设计[J/OL]. 电源学报, 1-12. http://kns.cnki.net/kcms/detail/12.1420.TM.20220506.1120.002.html Guan Rui, Zhou Yu, Gao Zongqiu, et al. Design of pulsed power supply for HT-6M Tokamak heating field[J/OL]. Journal of Power Supply, 1-12. http://kns.cnki.net/kcms/detail/12.1420.TM.20220506.1120.002.html.
[2]	Jin Y S, Lee H S, Kim J S, et al. Compact 200 kJ pulse power system with a simple crowbar circuit[C]//Proceedings of the 14th IEEE International Pulsed Power Conference. 2003: 1239-1242.
[3]	仝玮. 大型超导装置失超保护系统换流回路及其关键问题研究[D]. 合肥: 中国科学技术大学, 2021 Tong Wei. Study on commutation circuit and key problems of quench protection system for large scale superconducting devices[D]. Hefei: University of Science and Technology of China, 2021
[4]	李传. ITER极向场变流器高功率大电流电抗器的设计与研制[D]. 武汉: 华中科技大学, 2016 Li Chuan. Research and design on high-power large-current reactor applied to ITER poloidal field converter power supply[D]. Wuhan: Huazhong University of Science and Technology, 2016
[5]	王莹. 高功率脉冲电源[M]. 北京: 原子能出版社, 1991 Wang Ying. High power pulse power supply[M]. Beijing: Atomic Energy Press, 1991
[6]	王莹. 脉冲功率技术综述[J]. 电气技术, 2009(4):5-9 Wang Ying. The summary for technology of pulsed power[J]. Electrical Engineering, 2009(4): 5-9
[7]	李松乘, 鲁军勇, 程龙, 等. 电磁发射用脉冲电抗器应力分析及结构设计[J]. 国防科技大学学报, 2019, 41(4):39-45 doi: 10.11887/j.cn.201904006 Li Songcheng, Lu Junyong, Cheng Long, et al. Stress analysis and structure optimization of pulse reactor for electromagnetic launch[J]. Journal of National University of Defense Technology, 2019, 41(4): 39-45 doi: 10.11887/j.cn.201904006
[8]	刘佳, 董健年, 张小兵, 等. 电磁发射用电抗器温度场影响因素研究[J]. 弹道学报, 2014, 26(2):100-105 doi: 10.3969/j.issn.1004-499X.2014.02.021 Liu Jia, Dong Jiannian, Zhang Xiaobing, et al. Research on factors influencing temperature of pulse inductor used in electromagnetic launch[J]. Journal of Ballistics, 2014, 26(2): 100-105 doi: 10.3969/j.issn.1004-499X.2014.02.021
[9]	苏成. 小型化脉冲电感的研究[D]. 武汉: 华中科技大学, 2013 Su Cheng. Research on a miniaturized pulsed inductor[D]. Wuhan: Huazhong University of Science and Technology, 2013
[10]	卡兰塔罗夫, 采依特林. 电感计算手册[M]. 陈汤铭, 刘保安, 罗应立, 等译. 北京: 机械工业出版社, 1992 Kalantarov. Inductance calculation manual[M]. Chen Tangming, Liu Baoan, Luo Yingli, et al, trans. Beijing: China Machine Press, 1992
[11]	叶占刚. 干式空心电抗器的温升对其质量的影响[J]. 变压器, 1998, 35(3):31-33 doi: 10.19487/j.cnki.1001-8425.1998.03.008 Ye Zhangang. Influence of temperature rise on quality of dry-type air-core reactor[J]. Transformer, 1998, 35(3): 31-33 doi: 10.19487/j.cnki.1001-8425.1998.03.008
[12]	叶占刚. 干式空心电抗器的温升试验与绕组温升的计算[J]. 变压器, 1999, 36(9):6-12 doi: 10.19487/j.cnki.1001-8425.1999.09.002 Ye Zhangang. Temperature rise test of dry-type air-core reactor and calculation of its winding temperature rise[J]. Transformer, 1999, 36(9): 6-12 doi: 10.19487/j.cnki.1001-8425.1999.09.002
[13]	汪泉弟, 张艳, 李永明, 等. 干式空心电抗器周围工频磁场分布[J]. 电工技术学报, 2009, 24(1):8-13 doi: 10.3321/j.issn:1000-6753.2009.01.002 Wang Quandi, Zhang Yan, Li Yongming, et al. The power frequency magnetic field distribution around dry-type air-core reactor[J]. Transactions of China Electrotechnical Society, 2009, 24(1): 8-13 doi: 10.3321/j.issn:1000-6753.2009.01.002
[14]	褚凡武, 付颖, 王琦, 等. 不同工况下干式空心滤波电抗器稳态磁场及电磁力分布规律[J]. 高压电器, 2019, 55(11):41-47 doi: 10.13296/j.1001-1609.hva.2019.11.005 Chu Fanwu, Fu Ying, Wang Qi, et al. Distributions of steady-state magnetic field and electromagnetic force of a dry-type air-core filter reactor under different operating conditions[J]. High Voltage Apparatus, 2019, 55(11): 41-47 doi: 10.13296/j.1001-1609.hva.2019.11.005