化学激光器1/4环柱型增益发生器

Jin Donghuan; Liu Wenguang; Chen Xing; Lu Qisheng; Zhao YiJun

doi:10.3788/HPLPB20122405.1015

Volume 24 Issue 05

Jun. 2016

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2012 > 24(05): 1015-1018

Jin Donghuan, Liu Wenguang, Chen Xing, et al. 化学激光器1/4环柱型增益发生器[J]. High Power Laser and Particle Beams, 2012, 24: 1015-1018. doi: 10.3788/HPLPB20122405.1015

Citation:

Jin Donghuan, Liu Wenguang, Chen Xing, et al. 化学激光器1/4环柱型增益发生器[J]. High Power Laser and Particle Beams, 2012, 24: 1015-1018. doi: 10.3788/HPLPB20122405.1015

Jin Donghuan, Liu Wenguang, Chen Xing, et al. 化学激光器1/4环柱型增益发生器[J]. High Power Laser and Particle Beams, 2012, 24: 1015-1018. doi: 10.3788/HPLPB20122405.1015

Citation:

Jin Donghuan, Liu Wenguang, Chen Xing, et al. 化学激光器1/4环柱型增益发生器[J]. High Power Laser and Particle Beams, 2012, 24: 1015-1018. doi: 10.3788/HPLPB20122405.1015

PDF( 459 KB)

化学激光器1/4环柱型增益发生器

doi: 10.3788/HPLPB20122405.1015

1.
College of Opto-electric Science and Engineering,National University of Defense Technology,Changsha 410073,China

Received Date: 2011-06-20
Rev Recd Date: 2011-08-09
Publish Date: 2012-05-15

Abstract

Abstract

设计并搭建了化学激光器1/4环柱型增益发生器的实验系统。按设计流量进行了出光实验，功率计探测到的出光功率在60 W左右。测量了燃烧室温度及压力，与Alpha激光器HL911-3实验数据类似，燃烧室温度及压力曲线都存在一个爬升阶段。环柱型增益发生器沿角向扩张的特点使得光腔区压力很低，仅为0.5 kPa左右。为验证环柱状增益区的有效形成，对3对取光孔分别进行了出光实验，结果表明每对取光孔都有功率输出，证明设计的增益发生器运行正常。
- chemical laser,
- cylindrical gain generator assembly,
- hypersonic low temperature nozzle,
- combustion-driven