Narrow linewidth all-fiber laser with 666 W power output

Wang Xiaolin; Zhou Pu; Xiao Hu; Su Rongtao; Guo Shaofeng; Si Lei; Xu Xiaojun; Liu Zejin

doi:10.3788/HPLPB20122406.1261

Volume 24 Issue 06

May 2012

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > High Power Laser and Particle Beams > 2012 > 24(06): 1261-1262

Zou Yongning, Wu Lifen, Wang Jue, et al. Rotation volume measurement method based on CT sequence images[J]. High Power Laser and Particle Beams, 2013, 25: 2423-2428. doi: 10.3788/HPLPB20132509.2423

Citation:

Wang Xiaolin, Zhou Pu, Xiao Hu, et al. Narrow linewidth all-fiber laser with 666 W power output[J]. High Power Laser and Particle Beams, 2012, 24: 1261-1262. doi: 10.3788/HPLPB20122406.1261

Zou Yongning, Wu Lifen, Wang Jue, et al. Rotation volume measurement method based on CT sequence images[J]. High Power Laser and Particle Beams, 2013, 25: 2423-2428. doi: 10.3788/HPLPB20132509.2423

Citation:

Wang Xiaolin, Zhou Pu, Xiao Hu, et al. Narrow linewidth all-fiber laser with 666 W power output[J]. High Power Laser and Particle Beams, 2012, 24: 1261-1262. doi: 10.3788/HPLPB20122406.1261

PDF( 1090 KB)

Narrow linewidth all-fiber laser with 666 W power output

doi: 10.3788/HPLPB20122406.1261

1.
College of Opto-electric Science and Engineering,National University of Defense Technology,Changsha 410073,China

Received Date: 2012-01-15
Rev Recd Date: 2012-03-07
Publish Date: 2012-06-15

Abstract

Abstract

A master oscillator power amplifier (MOPA) structured narrow-linewidth Yb-doped fiber laser is set up in all-fiber format. In the system, a single frequency laser is broadened to be a 0.3 GHz-linewidth seed by using noise phase modulation technique. The power of the seed is then scaled from 10 mW up to 666 W through a four-stage power amplifier chain. Further power-scaling of this MOPA system can be expected since our experiment is only pump-power limited.
- fiber laser,
- narrow linewidth,
- phase modulation,
- master oscillator power amplifier

FullText(HTML)

References(0)

References

Relative Articles

[1]	Lu Zhijun, Zhou Zusheng, Xiao Ouzheng, Li Xiao. Optimization and design of high-power high-efficiency klystron output coupler[J]. High Power Laser and Particle Beams, 2024, 36(10): 103002. doi: 10.11884/HPLPB202436.240155
[2]	Li Lele, Huang Hua, Liu Zhenbang, He Hu, Yuan Huan. Emitting characteristics of co-axis double annulus cathode[J]. High Power Laser and Particle Beams, 2017, 29(10): 103001. doi: 10.11884/HPLPB201729.170116
[3]	Dong Yuhe, Liu Tianda, Fan Qiongxing, Wang Shuzhong. Calculation of gap impedance of TM₃₁₀ mode in coaxial output cavity with equivalent circuit theory[J]. High Power Laser and Particle Beams, 2013, 25(05): 1226-1230. doi: 10.3788/HPLPB20132505.1226
[4]	Ge Meng, Wang Yong. Klystron double-gap output structure with double coupling apertures[J]. High Power Laser and Particle Beams, 2013, 25(02): 407-410. doi: 10.3788/HPLPB20132502.0407
[5]	Zhang Rui, Wang Yong. Design of C-band 50 MW klystron with traveling wave output structure[J]. High Power Laser and Particle Beams, 2012, 24(12): 2858-2864. doi: 10.3788/HPLPB20122412.2858
[6]	Huang CHuanlu, Ding Yaogen, Wang Yong, Xie Xingjuan. Electron conductance and mode stability in multi-gap coupled cavity[J]. High Power Laser and Particle Beams, 2012, 24(01): 133-138.
[7]	Xie Xingjuan, Ding Yaogen, Liu Pukun, Huang Chuanlu, Dong Yuhe. Characteristic parameter calculation for output cavity of klystron with group delay time method[J]. High Power Laser and Particle Beams, 2012, 24(01): 152-156.
[8]	Xie Xingjuan, Huang Chuanlu, Dong Yuhe, Ding Yaogen, Liu Pukun. Output circuit design for double gap coaxial cavity loaded with waveguide filter[J]. High Power Laser and Particle Beams, 2012, 24(08): 1925-1930. doi: 10.3788/HPLPB20122408.1925
[9]	shen baoli, zhang zhaochuan, huang yunping. Development of output section for S-band broadband high-average-power klystron[J]. High Power Laser and Particle Beams, 2011, 23(09): 0- .
[10]	ding yaogen, shen bin, ding haibing. Influence of load mismatch on output characteristics of klystron[J]. High Power Laser and Particle Beams, 2011, 23(05): 0- .
[11]	sun jian, ding yao-gen, gu xue-chun. Ridge waveguide in output circuit of klystron[J]. High Power Laser and Particle Beams, 2008, 20(05): 0- .
[12]	quan ya-min, ding yao-gen, wang shu-zhong. Analysis and calculation of out-loaded resonant cavity[J]. High Power Laser and Particle Beams, 2008, 20(05): 0- .
[13]	lei lu-rong, fan zhi-kai, huang hua, ding en-yan, zhang xing-kai, chen zhi-gang, feng di-chao, yu ai-ming, liu tian-wen, yang zhou-bing, an hai-shi. Design and investigation of S-band klystron double-gap output cavity[J]. High Power Laser and Particle Beams, 2008, 20(01): 0- .
[14]	sun peng, ding yao-gen, zhao ding. Design of waveguide twist for klystron power combining output structure[J]. High Power Laser and Particle Beams, 2007, 19(05): 0- .
[15]	lei lu-rong, fan zhi-kai, he hu, huang hua. High frequency characteristics of double-gap output cavity[J]. High Power Laser and Particle Beams, 2007, 19(10): 0- .
[16]	lei lu-rong, fan zhi-kai, huang hua, he hu. Particle simulation of relativistic klystron amplifier double-gap output cavity[J]. High Power Laser and Particle Beams, 2007, 19(08): 0- .
[17]	liu zhi-gang, zhang zhao-chuan, ding yao-gen, li xian-xia. Simulation and design of three-mode overlapped two-gap coupled cavity type output circuit[J]. High Power Laser and Particle Beams, 2007, 19(07): 0- .
[18]	wang jin-hua, ding yao-gen. Application of field analysis method and impedance superposition method in gap-impedance calculation of klystron output circuit[J]. High Power Laser and Particle Beams, 2006, 18(02): 0- .
[19]	wang jin-hua, ding yao-gen, shen bin. Characteristic parameters in klystron output circuit by field analysis method[J]. High Power Laser and Particle Beams, 2005, 17(06): 0- .
[20]	cui xue-fang, liu qing-xiang, li xu-dong, fan zhi-kai. Theory analysis and experiment investigations of an original double-gap cavity[J]. High Power Laser and Particle Beams, 2001, 13(02): 0- .