亚纳秒脉冲高电压测量探头

Wei Bing; Fang Dongfan; Qing Yanling; Sun Qizhi; Feng Shuping; Yang Libing

doi:10.3788/HPLPB20122406.1497

Volume 24 Issue 06

May 2012

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2012 > 24(06): 1497-1501

Wei Bing, Fang Dongfan, Qing Yanling, et al. 亚纳秒脉冲高电压测量探头[J]. High Power Laser and Particle Beams, 2012, 24: 1497-1501. doi: 10.3788/HPLPB20122406.1497

Citation:

Wei Bing, Fang Dongfan, Qing Yanling, et al. 亚纳秒脉冲高电压测量探头[J]. High Power Laser and Particle Beams, 2012, 24: 1497-1501. doi: 10.3788/HPLPB20122406.1497

Wei Bing, Fang Dongfan, Qing Yanling, et al. 亚纳秒脉冲高电压测量探头[J]. High Power Laser and Particle Beams, 2012, 24: 1497-1501. doi: 10.3788/HPLPB20122406.1497

Citation:

Wei Bing, Fang Dongfan, Qing Yanling, et al. 亚纳秒脉冲高电压测量探头[J]. High Power Laser and Particle Beams, 2012, 24: 1497-1501. doi: 10.3788/HPLPB20122406.1497

PDF( 643 KB)

亚纳秒脉冲高电压测量探头

doi: 10.3788/HPLPB20122406.1497

1.
Institute of Fluid Physics,CAEP,P.O.Box 919-108,Mianyang 621900,China

Received Date: 2011-08-30
Rev Recd Date: 2011-12-31
Publish Date: 2012-06-15

Abstract

Abstract

为测量紧凑型快前沿高电压脉冲源的输出电压，设计了D-dot电压探头。分别进行了刻度因素标定和频响标定，采用前沿约50 ns的高压脉冲信号对探头进行在线标定确定探头的刻度因素。将探头安装在阻抗为50 的传输线上，用亚纳秒脉冲源进行频响标定，表明该探头的响应约为150 ps。高压实验结果表明该探头能够正确获取高电压快脉冲信号，工作稳定可靠。
- sub-nanosecond high voltage pulse,
- d-dot monitor,
- frequency response,
- calibration