Pulse output switch of Primary Test Stand

Xia Minghe; Ji Ce; Wang Yujuan; Wang Meng; Xie Weiping; Feng Shuping

doi:10.3788/HPLPB20122410.2516

Volume 24 Issue 10

Sep. 2012

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2012 > 24(10): 2516-2520

Xia Minghe, Ji Ce, Wang Yujuan, et al. Pulse output switch of Primary Test Stand[J]. High Power Laser and Particle Beams, 2012, 24: 2516-2520. doi: 10.3788/HPLPB20122410.2516

Citation:

Xia Minghe, Ji Ce, Wang Yujuan, et al. Pulse output switch of Primary Test Stand[J]. High Power Laser and Particle Beams, 2012, 24: 2516-2520. doi: 10.3788/HPLPB20122410.2516

Xia Minghe, Ji Ce, Wang Yujuan, et al. Pulse output switch of Primary Test Stand[J]. High Power Laser and Particle Beams, 2012, 24: 2516-2520. doi: 10.3788/HPLPB20122410.2516

Citation:

Xia Minghe, Ji Ce, Wang Yujuan, et al. Pulse output switch of Primary Test Stand[J]. High Power Laser and Particle Beams, 2012, 24: 2516-2520. doi: 10.3788/HPLPB20122410.2516

PDF( 1944 KB)

Pulse output switch of Primary Test Stand

doi: 10.3788/HPLPB20122410.2516

1.
Institute of Fluid Physics,CAEP,P.O.Box 919-108,Mianyang 621900,China

Received Date: 2012-03-01
Rev Recd Date: 2012-04-09
Publish Date: 2012-10-15

Abstract

Abstract

The self-breakdown water switch with coaxial-triplate configuration is used for the pulse output switch of the pulse forming section in Primary Test Stand (PTS). The research contains two stages, the first is the 1.5 MV coaxial water switch experiment on FLASH-Ⅱand the second is the experiment of 4 MV coaxial-triplate multi-channel water switch on the prototype module of PTS. Results show that the output current is 500 kA with 100 ns rise time at 3.5 MV self-breakdown voltage, the total switch inductance is 65 nH, and the jitter of charging time is 1.3 ns.
- primary test stand,
- pulse output switch,
- coaxial-triplate configuration,
- jitter