100kV/2A threephase constantcurrent repetitiverate charging equipment

tan yu gang; han min; chen li dong; guo zhi gang; zou xiao bing; luo min; cao shao yun; chang an bi

Volume 14 Issue 05

Oct. 2002

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2002 > 14(05): 0-

tan yu gang, han min, chen li dong, et al. 100kV/2A threephase constantcurrent repetitiverate charging equipment[J]. High Power Laser and Particle Beams, 2002, 14.

Citation:

tan yu gang, han min, chen li dong, et al. 100kV/2A threephase constantcurrent repetitiverate charging equipment[J]. High Power Laser and Particle Beams, 2002, 14.

tan yu gang, han min, chen li dong, et al. 100kV/2A threephase constantcurrent repetitiverate charging equipment[J]. High Power Laser and Particle Beams, 2002, 14.

Citation:

tan yu gang, han min, chen li dong, et al. 100kV/2A threephase constantcurrent repetitiverate charging equipment[J]. High Power Laser and Particle Beams, 2002, 14.

PDF( 267 KB)

100kV/2A threephase constantcurrent repetitiverate charging equipment

1.
Gas Discharge and Plasma Laboratory,Department of Electrical Engineering,Tsinghua University,Beijing 100084,China;
2.
Institute of Applied Electronics,CAEP,P.O.Box 919 1015,Mianyang 621900,China

Publish Date: 2002-10-15

Abstract

Abstract

A 100kV/2A threephase constantcurrent repetitiverate charging equipment was designed and constructed. A threephase LC converter is adopted as constantcurrent power source. Six Insulated Gate Bipolar Transistors(IGBTs) are connected in parallel to control the stop of charge. A Programmable Logical Controller(PLC) is the central element of the control unit. The equipment is used in the repetitiverate discharge features test of the switch. It works stably under the conditions of 2A charging current, 10Hz operating voltage, 100kV repetitiverate and 1μF capacitor.
- repetitiverate,
- threephase lc converter,
- insulated gate bipolar transistor(igbt),
- programmable logical controller(plc)