Growth and laser damage threshold of DKDP crystal from different material

sun shao-tao; ji lai-lin; wang zheng-ping; liu bing; mu xiao-ming; sun xun; xu xin-guang; shi chong-de

Volume 20 Issue 05

May 2008

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2008 > 20(05): 0-

sun shao-tao, ji lai-lin, wang zheng-ping, et al. Growth and laser damage threshold of DKDP crystal from different material[J]. High Power Laser and Particle Beams, 2008, 20.

Citation:

sun shao-tao, ji lai-lin, wang zheng-ping, et al. Growth and laser damage threshold of DKDP crystal from different material[J]. High Power Laser and Particle Beams, 2008, 20.

sun shao-tao, ji lai-lin, wang zheng-ping, et al. Growth and laser damage threshold of DKDP crystal from different material[J]. High Power Laser and Particle Beams, 2008, 20.

Citation:

sun shao-tao, ji lai-lin, wang zheng-ping, et al. Growth and laser damage threshold of DKDP crystal from different material[J]. High Power Laser and Particle Beams, 2008, 20.

PDF( 1023 KB)

Growth and laser damage threshold of DKDP crystal from different material

1.
State Key Laboratory of Crystal Materials,Shandong University,Jinan 250100,China;
2.
Shanghai Institute of Laser Plasmas,CAEP,P.O.Box 800-229,Shanghai 201800,China;
3.
Naval Aeronautical Engineering Institute Basic Department,Yantai 264001,China

Publish Date: 2008-05-15

Abstract

Abstract

In this paper, DKDP crystals were grown from 85%-deuterated solution of different materials by traditional temperature-reduction method. Then some of the crystals were chosen to test laser damage threshold by the third harmonic generation of 1 064 nm. It was found that the solution stability of DKDP crystal growth dropped slightly, but obviously, and the laser damage threshold increased for purer raw material as the metallic ionic impurity varied in the materials.
- dkdp crystal,
- laser damage threshold,
- crystal growth,
- traditional temperature-reduction method,
- inertial confined fusion