feng shuping, li hongtao, cao wenbin, et al. High voltage low jitter Marx generator of prototype module of primary test stand[J]. High Power Laser and Particle Beams, 2009, 21.
Citation:
feng shuping, li hongtao, cao wenbin, et al. High voltage low jitter Marx generator of prototype module of primary test stand[J]. High Power Laser and Particle Beams, 2009, 21.
feng shuping, li hongtao, cao wenbin, et al. High voltage low jitter Marx generator of prototype module of primary test stand[J]. High Power Laser and Particle Beams, 2009, 21.
Citation:
feng shuping, li hongtao, cao wenbin, et al. High voltage low jitter Marx generator of prototype module of primary test stand[J]. High Power Laser and Particle Beams, 2009, 21.
A low jitter 6 MV/300 kJ Marx generator has been developed for the primary test stand(PTS) which will be built for Z-pinch studies at Institute of Fluid Physics, CAEP. The generator is designed as a leading triggering circuit based on the S-type structure. It is composed of sixty 100 kV/1 mF capacitors and thirty 200 kV low jitter ring rail field distortion switches developed by Institute of Fluid Physics. The experimental results reveal that the serial capacitance of the Marx generator is 16.7 nF, the serial inductance is 13.5 mH and the serial resistance is 3.2 Ω. As the charging voltage of the capacitors is 80 kV, the working storage energy of the Marx generator is 192 kJ, the measured output voltage is 4.3 MV, the erection time is about 175 ns and its RMS jitter is less than 7.0 ns. T
DownLoad: