Simulation and optimization of cooling system for 2kW accelerator

li shao qing; shen lian guan; yao jian ping; li xiao guang; cao lei; jiang dao man; pei yuan ji

Volume 15 Issue 12

Dec. 2003

Turn off MathJax

Article Contents

Article Navigation > High Power Laser and Particle Beams > 2003 > 15(12): 0-

li shao qing, shen lian guan, yao jian ping, et al. Simulation and optimization of cooling system for 2kW accelerator[J]. High Power Laser and Particle Beams, 2003, 15.

Citation:

li shao qing, shen lian guan, yao jian ping, et al. Simulation and optimization of cooling system for 2kW accelerator[J]. High Power Laser and Particle Beams, 2003, 15.

li shao qing, shen lian guan, yao jian ping, et al. Simulation and optimization of cooling system for 2kW accelerator[J]. High Power Laser and Particle Beams, 2003, 15.

Citation:

li shao qing, shen lian guan, yao jian ping, et al. Simulation and optimization of cooling system for 2kW accelerator[J]. High Power Laser and Particle Beams, 2003, 15.

PDF( 264 KB)

Simulation and optimization of cooling system for 2kW accelerator

1.
Department of Precision Machinery and Precision Instrumentation,University of Science and Technology of China,Hefei 230026,China;
2.
National Synchrotron Radiation Laboratory,University of Science and Technology of China,Hefei 230029,China

Publish Date: 2003-12-15

Abstract

Abstract

This paper introduces the digitized design of the cooling system of 2kW traveling wave accelerator which is used for killing anthrax. The parameters of cooling system was calculated and optimized by means of finite element analysis. The work was done with the CAD software IDEAS. As a result, a compact jacket style structure of stainless steel is got and employed in the accelerator. The system is very robust again surrounding temperature change. Now the cooling facility is running well.
- cad,
- cooling system,
- accelerator,
- optimization,
- simulation