波导-同轴线的脊型转换器设计与测试

张辉; 慕振成; 荣林艳; 王博; 万马良; 谢哲新; 周文中; 李松; 刘美飞

doi:10.11884/HPLPB202133.210105

波导-同轴线的脊型转换器设计与测试

doi: 10.11884/HPLPB202133.210105

张辉^{1, 2,},
慕振成^{1, 2},
荣林艳^{1, 2},
王博^{1, 2},
万马良^{1, 2},
谢哲新^{1, 2},
周文中^{1, 2},
李松^{1, 2},
刘美飞^{1, 2}

1.
中国科学院高能物理研究所，北京 100049
2.
散裂中子源科学中心，广东东莞 523803

详细信息

作者简介:
张　辉，zhanghui@ihep.ac.cn

中图分类号: TN015
计量
- 文章访问数: 1740
- HTML全文浏览量: 627
- PDF下载量: 103
- 被引次数: 0
出版历程
- 收稿日期: 2021-03-22
- 修回日期: 2021-03-26
- 网络出版日期: 2021-09-14
- 刊出日期: 2021-10-15

Design and test of device for transition from ridge waveguide to coaxial line

Zhang Hui^{1, 2
,},
Mu Zhencheng^{1, 2},
Rong Linyan^{1, 2},
Wang Bo^{1, 2},
Wan Maliang^{1, 2},
Xie Zhexin^{1, 2},
Zhou Wenzhong^{1, 2},
Li Song^{1, 2},
Liu Meifei^{1, 2}

1.
Institute of High Energy Physics, Chinese Academy of Sciences (CAS), Beijing 100049, China
2.
Spallation Neutron Source Science Center (SNSSC), Dongguan 523803, China

摘要

摘要: 射频测量系统中经常会用到波导-同轴线转换器，主要是利用其将射频器件的波导端口转换成能够直接接入测量仪器的50 Ω同轴线。本文设计的648 MHz/WR1500波导同轴转换器主要用于CSNS升级工程（CSNS-II）超导直线射频器件的测量。利用切比雪夫脊型阶梯阻抗变换和探针耦合的方式实现波导到同轴线的转换。对脊加载波导和不连续同轴线分别进行了分析，得到最优尺寸。为了提高测量精度，设计的波导-同轴线转换器具有低插入损耗、低驻波比和宽带宽等特性。最后对生产的转换器进行了测试，测试结果与仿真结果相近，能够满足作为测量器件的使用要求。
- 散裂中子源 /
- 脊波导 /
- 同轴线 /
- 转换器 /
- 不连续
Abstract: Waveguide to coaxial line transtion is often used in RF measurement systems. To measure the network parameters of these RF devices with a vector network analyzer and other instruments, the transtion is indispensable to convert the waveguide ports of the RF devices to 50 Ω coaxial line which can directly access the network analyzer. The 648 MHz/WR1500 transformer designed in this paper is mainly used for the measurement of the superconducting linac RF devices at the China Spallation Neutron Source (CSNS) upgrading phase (CSNS-II). In this paper Chebyshev ridge ladder impedance transformation and probe coupling are adopted to complete waveguide to coaxial line transition. The ridge loaded waveguide and discontinuous coaxial line are analyzed respectively, and the optimal size is obtained. The designed transformer has the characteristics of low insertion loss, low VSWR and wide bandwidth to achieve high measurement accuracy. At last, the transition device is tested, and the test results are close to the simulation results, which can meet the requirements of being a measuring device.
- China Spallation Neutron Source /
- ridge waveguide /
- coaxial line /
- transtion /
- discontinuity

HTML全文

图 1 脊波导-同轴线转换器示意图

Figure 1. Schematic diagram of ridge waveguide to coaxial transition

下载: 全尺寸图片幻灯片

图 2 脊厚度对回波损耗的影响

Figure 2. Influence of thickness on return loss

下载: 全尺寸图片幻灯片

图 3 脊的位置对回波损耗的影响

Figure 3. Influence of location on return loss

下载: 全尺寸图片幻灯片

图 4 不连续性同轴线及其等效电路

Figure 4. Discontinuous coaxial line and its equivalent circuit

下载: 全尺寸图片幻灯片

图 5 不连续电容C_d曲线（α=a/b）

Figure 5. Discontinuous capacitance C_d curve

下载: 全尺寸图片幻灯片

图 6 不同间隙半径比a/b情况下的回波损耗

Figure 6. Return loss with different a/b

下载: 全尺寸图片幻灯片

图 7 探针半径对回波损耗的影响

Figure 7. Influence of radius on return loss

下载: 全尺寸图片幻灯片

图 8 探针长度对回波损耗的影响

Figure 8. Influence of length on return loss

下载: 全尺寸图片幻灯片

图 9 脊波导和同轴线的电场分布

Figure 9. Distribution of electric field in ridge waveguide and coaxial line

下载: 全尺寸图片幻灯片

图 10 S参数仿真曲线

Figure 10. S parameters simulation curve

下载: 全尺寸图片幻灯片

图 11 （a）转换器纵向切面图，（b）聚四氟乙烯加工图，（c）内导体及探针加工图

Figure 11. (a) Cross section of transition，(b) teflon machining dimension and (c) inner conductor and probe machining dimension

下载: 全尺寸图片幻灯片

图 12 （a）转换器侧视图及探针，（b）转换器正视图及脊

Figure 12. (a) Side view of transition and probe，(b) front view of transition and ridge

下载: 全尺寸图片幻灯片

图 13 实际产品测试曲线

Figure 13. Product test curves

下载: 全尺寸图片幻灯片

参考文献(13)

[1]	张健穹, 刘庆想, 李相强, 等. 三角形栅格矩形径向线螺旋阵列天线的设计与实验研究[J]. 强激光与粒子束, 2009, 21(4):550-554. (Zhang Jianqiong, Liu Qingxiang, Li Xiangqiang, et al. Design and experimental research on triangle-grid radial-line helical rectangular array antenna[J]. High Power Laser and Particle Beams, 2009, 21(4): 550-554
[2]	王文祥. 微波工程技术[M]. 北京: 国防工业出版社, 2009. Wang Wenxiang. Microwave engineering technology[M]. Beijing: National Defense Industry Press, 2009
[3]	Eric H. Essentials of RF and microwave grounding[M]. Boston: Artech House, 2006.
[4]	Gupta K C. Microstrip lines and slotlines [M]. 2nd ed. Norwood MA: Artech House, 2006.
[5]	Yao Huiwen, Amr A, Ji F L, et al. A full wave analysis of microstrip to waveguide transitions[J]. IEEE Transactions on Microwave Theory and Techniques, 1994, 42(12): 213-216.
[6]	张克潜, 李德杰. 微波与光电子学中的电磁理论[M]北京: 电子工业出版社. 2001. Zhang Keqian, Li Dejie. Electromagnetic theory in microwave and optoelectronics[M]. Beijing: Publishing House of Electronics Industry, 2001
[7]	Malik Z Y, Abdul M, Muhammad I N, et al. Narrow band ridge waveguide-to-microstrip transition for low noise amplifier at Ku-band[C]//Proceedings of International Bhurban Conference on Applied Sciences & Technology Islamabad. 2009: 140-143
[8]	Yang Rugui. Electromagnetic field and electromagnetic wave[M]. Beijing: Higher Education Press, 2005.
[9]	David M P. 微波工程[M]. 北京: 电子工业出版社, 2017. David M P. Microwave engineering[M]. Beijing: Publishing House of Electronics Industry, 2017
[10]	Skolnik M I. Radar handbook[M]. New York: McGraw Hill, 1990.
[11]	同轴线中被补偿不连续性的反射系数曲线系以及最佳尺寸的确定[J]. 无线电工程译文, 1971(2): 85-98. Determination of reflection coefficient curve system and optimal size of compensated discontinuity in coaxial line[J]. Radio Engineering, 1971(2): 85-98
[12]	Whinnery J R, Jamieson H W. Equivalent circuits for discontinuities in transmission lines[C]//Proceedings of the I. R. E. 1944: 98-114
[13]	柯林 R. E. 微波工程基础[M]. 北京: 人民邮电出版社, 1981. Colin R E. Fundamentals of microwave engineering[M]. Beijing: People’s Posts and Telecommunications Publishing House, 1981