1.2 kW便携式光纤激光器

张利明; 张昆; 赵鸿; 孙儒峰; 龙润泽; 朱辰; 宋奎岩; 李尧; 余洋; 周寿桓

doi:10.11884/HPLPB202234.210284

1.2 kW便携式光纤激光器

doi: 10.11884/HPLPB202234.210284

中国电子科技集团公司第十一研究所固体激光技术重点实验室，北京 100015

详细信息

作者简介:
张利明，laser_2014@163.com

中图分类号: TN248
计量
- 文章访问数: 1820
- HTML全文浏览量: 395
- PDF下载量: 140
- 被引次数: 0
出版历程
- 收稿日期: 2021-07-13
- 修回日期: 2022-03-03
- 网络出版日期: 2022-03-07
- 刊出日期: 2022-01-13

1.2 kW portable fiber laser

Science and Technology on Solid-state Laser Laboratory, the 11th Research Institute of China Electronics Technology Group Corporation, Beijing 100015, China

摘要

摘要: 高功率光纤激光器通常采用如水冷散热方式进行控温，难以满足轻量化等的需求。而利用相变储能材料的特性，采用多相变控温技术，可大幅减小高功率光纤激光器系统的体积、重量。对光纤激光器的温控技术进行了分析，采用多相变温控技术，实现了波长1.08 μm、最大功率1.26 kW的全光纤激光输出，光-光效率75.4%，光束质量因子M_x²=1.21，M_y²=1.23，有效减小了激光器的体积和质量，为高功率光纤激光器的热管理提供了新方法。
- 光纤激光器 /
- 相变直冷 /
- 相变储能 /
- 热管理
Abstract: High-power fiber lasers usually use water-cooled heat dissipation methods for temperature control, which are difficult to meet the needs of light. By using the characteristics of phase change energy storage materials and multi-phase change temperature control technology, the volume and weight of high-power fiber laser systems can be greatly reduced. In this paper, the temperature control technology of the fiber laser is analyzed, and the multi-phase change temperature control technology is used. The all-fiber laser output with a wavelength of 1.08 μm and a maximum power of 1.26 kW is achieved. The light-light efficiency is 75.4%, and the beam quality is M_x²=1.21, M_y²=1.23. The volume and weight of the laser is effectively reduced. It provides a new method for thermal management of high-power fiber lasers.
- fiber laser /
- phase change refrigeration /
- phase change energy storage /
- thermal management

HTML全文

图 1 1.2 kW光纤激光器原理图

Figure 1. Principle diagram of the 1.2 kW fiber laser

下载: 全尺寸图片幻灯片

图 2 激光器控温原理图

Figure 2. Schematic diagram of laser temperature control

下载: 全尺寸图片幻灯片

图 3 激光功率随泵浦光功率的变化

Figure 3. Laser power varies with the power of the pump light

下载: 全尺寸图片幻灯片

图 4 输出激光光谱

Figure 4. Output laser spectrum

下载: 全尺寸图片幻灯片

图 5 输出激光光斑图像及拟合曲线

Figure 5. Output laser spot image and fitting curves

下载: 全尺寸图片幻灯片

图 6 功率1.26 kW时激光器温度随时间的变化

Figure 6. Change of laser temperature with time when the power is 1.26 kW

下载: 全尺寸图片幻灯片

图 7 输出功率稳定性

Figure 7. Stability of output laser power

下载: 全尺寸图片幻灯片

参考文献(13)

[1]	楼祺洪, 张海波, 袁志军. 光纤和光纤激光器[J]. 科学, 2018, 70(2):32-37. (Lou Qihong, Zhang Haibo, Yuan Zhijun. Optical fibers and fiber lasers[J]. Science, 2018, 70(2): 32-37
[2]	Xiao Y, Brunet F, Kanskar M, et al. 1-kilowatt CW all-fiber laser oscillator pumped with wavelength-beam-combined diode stacks[J]. Optics Express, 2012, 20(3): 3296-3301. doi: 10.1364/OE.20.003296
[3]	O’Connor M. High power fiber lasers for defense applications[C]//Proceedings of Fiber Laser Applications 2012. San Diego: Optical Society of America, 2012: FW3C. 1.
[4]	吴彩缘. 高功率双包层光纤激光器及其应用[D]. 厦门: 厦门大学, 2009 Wu Caiyuan. High power double-clad fiber lasers and their applications[D]. Xiamen: Xiamen University, 2009
[5]	楼祺洪, 周军, 朱健强, 等. 高功率光纤激光器研究进展[J]. 红外与激光工程, 2006, 35(2):135-138. (Lou Qihong, Zhou Jun, Zhu Jianqiang, et al. Recent progress of high-power fiber lasers[J]. Infrared and Laser Engineering, 2006, 35(2): 135-138 doi: 10.3969/j.issn.1007-2276.2006.02.003
[6]	Tyagi V V, Buddhi D, Kothari R, et al. Phase change material (PCM) based thermal management system for cool energy storage application in building: an experimental study[J]. Energy and Buildings, 2012, 51: 248-254. doi: 10.1016/j.enbuild.2012.05.023
[7]	Ge Haoshan, Li Haiyan, Mei Shengfu, et al. Low melting point liquid metal as a new class of phase change material: an emerging frontier in energy area[J]. Renewable and Sustainable Energy Reviews, 2013, 21: 331-346. doi: 10.1016/j.rser.2013.01.008
[8]	尹辉斌, 高学农, 丁静, 等. 基于快速热响应相变材料的电子器件散热技术[J]. 华南理工大学学报(自然科学版), 2007, 35(7):52-56,104. (Yin Huibin, Gao Xuenong, Ding Jing, et al. Cooling technology of electronic device based on phase-change material with rapid thermal response[J]. Journal of South China University of Technology (Natural Science Edition), 2007, 35(7): 52-56,104
[9]	伍志坚. 相变制冷在激光腔镜中的应用研究[D]. 大连: 大连海事大学, 2003 Wu Zhijian. Research of phase-change cooling applied on laser mirror[D]. Dalian: Dalian Maritime University, 2003
[10]	张琳. 高功率光纤激光器热控技术研究[D]. 太原: 中北大学, 2016 Zhang Lin. Research on the thermal control technology for high power fiber laser[D]. Taiyuan: North University of China, 2016
[11]	程勇, 郭延龙, 何志祝, 等. 相变散热技术在小型高效半导体抽运激光器中的应用研究[J]. 中国激光, 2016, 43:0102005. (Cheng Yong, Guo Yanlong, He Zhizhu, et al. Application research of phase change material heat removal technology for compact high efficiency diode pumped laser[J]. Chinese Journal of Lasers, 2016, 43: 0102005 doi: 10.3788/CJL201643.0102005
[12]	刘倚红, 余文峰, 孙峰, 等. 半导体致冷复合相变硅镜光照热有限元模拟[J]. 激光技术, 2005, 29(1):10-11,18. (Liu Yihong, Yu Wenfeng, Sun Feng, et al. Finite element stimulating about laser radiation of semiconductor-cooled composite phase change silicon mirror[J]. Laser Technology, 2005, 29(1): 10-11,18
[13]	刘岩, 朱辰, 张利明, 等. 相变直冷高功率光纤激光器 [J]. 激光与红外, 2019, 49(12): 1425-1430 Liu Yan, Zhu Chen, Zhang Liming, et al. Phase change direct cooling high power fiber laser[J]. Laser ＆ Infrared, 2019, 49(12): 1425-1430